Jamal Zamani

Journal Paper

1. ""
   Jamal Zamani
   AAPG BULLETIN, pp.243-256,
2. ""
   Vahid Moosabeiki Dehabadi, Jamal Zamani
   
3. ""
   Jamal Zamani
   pp.73-79,
4. "Examination of adhesive force and the model's dimension in continuous and conventional printing using the oxygen inhibition effect"
   Jamal Zamani
   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE,
5. ""
   Jamal Zamani
   pp.91-101,
6. "Simulation of Melting and Compression of Feedstock inside the Extruder of FDMS System"
   Jamal Zamani, AmirHossein Rahimi
   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,
7. ""
   Jamal Zamani
   Aerospace Mechanics,
8. "Experimental theoretical and numerical studies on the response of square plates subjected to blast"
   Jamal Zamani
   JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, pp.806-816,
9. "Theoretical Experimental and Numerical (FEM) Investigation on the Behavior of Tubular Shells under"
   Jamal Zamani
   pp.80-89,
10. "Experimental analysis of clamped AA5010 and steel plates subjected to blast loading and underwater e"
    Jamal Zamani
    JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, pp.201-212,
11. "Theoretical Calculation of the Maximum Radial Deformation of a Cylindrical Shell under Explosive For"
    Jamal Zamani
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, pp.576-584,
12. ""
    Jamal Zamani
    pp.124-128,
13. ""
    Jamal Zamani
    AAPG BULLETIN,
14. ""
    Jamal Zamani
    AAPG BULLETIN,
15. ""
    Vahid Moosabeiki Dehabadi, Jamal Zamani
    
16. "An experimental comparison on dimensional accuracy of wax patterns of gas turbine blades produced by"
    Jamal Zamani
    SCIENCE, pp.20-30,
17. ""
    Jamal Zamani
    SCIENCE, pp.20-30,
18. ""
    Jamal Zamani
    AAPG BULLETIN, pp.20-30,
19. ""
    Mohammad Vahab Mousavi, Jamal Zamani
    
20. "Strength-wear trade-off in DLMD Stellite 6-SiC coatings"
    Mohammad Pourentezari, Jamal Zamani
    SURFACE ENGINEERING, Vol. 3, pp.1-13, 2026
21. "A review on layerless 3D printing: challenges and applications"
    SIAVASH MOAYEDI MANIZANI, Jamal Zamani, Mohammad Salehi
    RAPID PROTOTYPING JOURNAL, Vol. 31, pp.409-431, 2025
22. "The Examination of adhesive force and the model's dimension in continuous and conventional printing using the oxygen inhibition effect"
    Amir hasan Manzour, Jamal Zamani
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, Vol. 238, pp.10733-10743, 2024
23. ""
    Mohammad Salehi, SIAVASH MOAYEDI MANIZANI, Mohammadtaghi Shayesteh, Amir hasan Manzour, Jamal Zamani
    Vol. 23, pp.151-159, 2023
24. "Experimental investigation of the effect of the PDMS material's oxygen- permeable window geometry on layerless uniform 3D printing"
    Mohammad Salehi, Jamal Zamani, SIAVASH MOAYEDI MANIZANI
    Australian Journal of Mechanical Engineering, pp.1-10, 2023
25. "Investigating the Effect of Separation Speed and Image Cross-Section Geometry on The Separation Force in DLP Method using FEP and PP Polymer Membranes"
    SIAVASH MOAYEDI MANIZANI, Jamal Zamani, Mohammad Salehi, Mohammadtaghi Shayesteh
    International Journal of Advanced Design and Manufacturing Technology, Vol. 16, pp.9-17, 2023
26. ""
    Mohammad Salehi, Jamal Zamani, SIAVASH MOAYEDI MANIZANI
    Aerospace Mechanics, Vol. 19, pp.57-68, 2023
27. ""
    SIAVASH MOAYEDI MANIZANI, Jamal Zamani, Mohammad Salehi
    Vol. 9, pp.10-20, 2022
28. "Experimental Study of Buckling of Reinforced Conical Composite Shell Under Hydrostatic Loading"
    Jamal Zamani, Reza Jangi, Mohammad Hossein Vahabi Meybodi
    Mechanics of Advanced Composite Structures, Vol. 9, pp.359-366, 2022
29. ""
    Jamal Zamani, AmirHossein Rahimi
    Vol. 2, pp.59-67, 2022
30. "Development of a Feedstock for Additive Manufacturing of 4605 Steel Compact by FDMS process"
    AmirHossein Rahimi, Jamal Zamani
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, Vol. 2, pp.231-242, 2022
31. ""
    SIAVASH MOAYEDI MANIZANI, Mohammad Salehi, Jamal Zamani
    Vol. 22, pp.259-263, 2022
32. "FeedStock Fabrication of AISI 4605 Steel for Fused Deposition Modeling and Sintering and designing of its extruder mechanism"
    AmirHossein Rahimi, Jamal Zamani
    International Journal of Advanced Design and Manufacturing Technology, Vol. 15, pp.125-132, 2022
33. ""
    SIAVASH MOAYEDI MANIZANI, Jamal Zamani, Mohammad Salehi
    Vol. 9, pp.10-20, 2022
34. "Experimental Study of a Disk Diaphragm Thickness Influence on a Planar Shock Wave Formation and Position During its Propagation in a Gas Shock Tube"
    Forough Sardarzadeh, Jamal Zamani
    EXPERIMENTAL TECHNIQUES, Vol. 3, pp.11-23, 2021
35. ""
    Jamal Zamani, Ramyar Hosseinzadeh
    Vol. 20, pp.637-647, 2020
36. "Optical Measurement System to Measure Velocity and Provide Shock Wave Pressure Diagrams"
    Jamal Zamani, Forough Sardarzadeh, m.h. Ghezelayagh, Mohamad ali Samimi
    International Journal of Engineering, Vol. 33, pp.505-512, 2020
37. "Shock Wave Pressure and Velocity Measuring Using a Novel Optic Sensor in a Newly Designed Diaphragm-less Shock Tube"
    Mohamad ali Samimi, Jamal Zamani, Forough Sardarzadeh
    EXPERIMENTAL TECHNIQUES, Vol. 3, pp.11-23, 2020
38. ""
    Jamal Zamani, Mohamad ali Samimi
    Aerospace Mechanics, Vol. 16, pp.99-107, 2020
39. "An Optical Measurement System to Measure Velocity and Provide Shock Wave Pressure Diagrams"
    Jamal Zamani, Mohamad ali Samimi, Forough Sardarzadeh, M.H Ghezelayagh
    International Journal of Engineering Transactions C: Aspects, Vol. 33, pp.505-512, 2020
40. "Numerical and theoretical determination of various materials Hugoniot relations based on the equation of state in high-temperature shock loading"
    Mohammad Hallajisany, Jamal Zamani, J. Albelda Vitoria
    HIGH PRESSURE RESEARCH, Vol. 39, pp.666-690, 2019
41. ""
    M. H. Ghezel Ayagh, Mohamad ali Samimi, Jamal Zamani
    Vol. 19, pp.1265-1274, 2019
42. ""
    Jamal Zamani, Forough Sardarzadeh
    Aerospace Mechanics, Vol. 15, pp.83-94, 2019
43. "Semi-analytical modeling of steady weak shock wave front for solid metals following the Swegle-Grady relation"
    Mohammad Hallajisany, J Albelda Vitoria, Jamal Zamani
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, Vol. 5, pp.1-19, 2018
44. "Ordered structure composite metal foams produced by casting"
    Farrokh Binesh, Jamal Zamani,
    International Journal of Metalcasting, Vol. 12, pp.89-96, 2018
45. ""
    Jamal Zamani, Mohamad ali Samimi,
    Aerospace Mechanics, Vol. 14, pp.27-38, 2018
46. "A new model for the time delay between elastic and plastic wave fronts in shock waves propagating in solids"
    Mohammad Hallajisany, Jamal Zamani, Majid Seyedsalehi, Jose Albelda Vitoria
    SHOCK WAVES, Vol. 27, pp.55-89, 2018
47. ""
    , Jamal Zamani, Amir hossein Hadavand
    Vol. 7, pp.61-72, 2018
48. ""
    Jamal Zamani, Ramyar Hosseinzadeh
    Aerospace Mechanics, Vol. 14, pp.27-42, 2018
49. "A new model for the time delay between elastic and plastic wave fronts for shock waves propagating in solids"
    Mohammad Hallajisany, Jamal Zamani, Majid Seyedsalehi, J. Albelda Vitoria
    SHOCK WAVES, Vol. 27, 2018
50. ""
    , Jamal Zamani
    Vol. 5, pp.1-12, 2018
51. ""
    , Jamal Zamani
    Aerospace Mechanics, Vol. 13, pp.33-40, 2017
52. "Experimental and numerical study of isotropic circular plates response to underwater explosive loading created by conic shock tube"
    Mehran Heshmati, Jamal Zamani, Ali Mozaffari
    MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, Vol. 48, pp.106-121, 2017
53. "Experimental investigation of process parameters on layer thickness and density in direct metal laser sintering a response surface methodology approach"
    , Jamal Zamani, Abdolhossien Jalali Aghchai, Ehsan Ghasemi
    Virtual and Physical Prototyping, Vol. 12, pp.133-140, 2017
54. "Semi analytical modeling the steady weak shock wave front in a solid following the Swegle-Grady relation"
    Mohammad Hallajisany, Jamal Zamani
    Advanced Structured Materials, Vol. 5, pp.55-72, 2017
55. "OPTIMIZATION OF DIMENSIONAL ACCURACY OF WAX MODELS MANUFACTURED BY RAPID TOOLING METHOD"
    Jamal Zamani, Hamidreza Nasari
    International Journal of Mechanical And Production Engineering, Vol. 5, pp.19-21, 2017
56. "Experimental investigation of laser-assisted powder bed fusion of Fe-Cu powder mixture"
    , Jamal Zamani
    Progress in Additive Manufacturing, Vol. 2, pp.151-156, 2017
57. ""
    , Jamal Zamani
    Vol. 16, pp.153-162, 2017
58. ""
    , Jamal Zamani, Ali Mozaffari
    Vol. 16, pp.241-250, 2016
59. ""
    Mohammad Vahab Mousavi, Jamal Zamani
    Vol. 3, pp.29-39, 2016
60. "Numerical Investigation of Circular Plates Deformation under Air Blast Wave"
    Bahman Veysi, Keivan Narooei, Jamal Zamani
    Iranian Journal of Materials Forming, Vol. 3, pp.12-26, 2016
61. "Intense Shock Wave Model in Crystalline Solid Materials Having Low Yield Stress"
    Mohammad Hallajisany, Jamal Zamani, Majid Seyedsalehi, José Albelda Vitoria
    Vol. 11, pp.39-52, 2016
62. "An experimental study on the effect of powder density and energy density on characteristic of steel 316 sintered parts"
    Jamal Zamani,
    RAPID PROTOTYPING JOURNAL, Vol. 12, pp.22-38, 2016
63. "The Numerical and Investigation of Circular Plates Deformation under Air Blast Wave"
    Bahman Veysi, Keivan Narooei, Jamal Zamani
    Iranian Journal of Materials Forming, Vol. 1, pp.12-26, 2016
64. "The experimental and numerical impacts of geometrical parameters of conical shock tube on the function maximum pressure and generative impulses to expose equivalent mass and behavioral equation"
    Mehran Heshmati, Jamal Zamani, Ali Mozaffari
    MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, Vol. 47, pp.623-634, 2016
65. ""
    Jamal Zamani, , , Mohammad Vahab Mousavi
    Vol. 3, pp.29-36, 2015
66. ""
    Seyyed Masood Bagheri, Jamal Zamani
    Vol. 10, pp.3-12, 2015
67. ""
    Vahid Moosabeiki Dehabadi, Jamal Zamani
    Vol. 14, pp.315-322, 2015
68. ""
    Ali Aslani, Jamal Zamani
    Vol. 1, pp.11-20, 2015
69. ""
    Mohsen Goodarzi, Jamal Zamani
    Vol. 15, pp.219-226, 2015
70. ""
    Seyyed Masood Bagheri, Jamal Zamani
    Vol. 15, pp.251-259, 2015
71. "Introduce a new model for expansion behavior of thick-walled cylinder under internal dynamic loading based on theoretical analysis"
    Seyyed Masood Bagheri, Jamal Zamani
    MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, Vol. 46, pp.747-757, 2015
72. ""
    , Jamal Zamani
    Vol. 15, pp.321-328, 2015
73. "Dynamic expansion modeling of thick-walled cylinder under internal high strain rate loading"
    Seyyed Masood Bagheri, Jamal Zamani, Mohamad Hossein Ghezelayagh
    MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, pp.1-36, 2015
74. "Modeling of dynamic expansion of thick-walled cylinder under high strain rate loading with strain rate sensitivity analysis"
    Seyyed Masood Bagheri, Jamal Zamani, J. A. Vitoria
    MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, Vol. 46, pp.1149-1159, 2015
75. "The effect of heat developed during high strain rate deformation on the constitutive modeling of amorphous polymers"
    Keivan H. Safari, Jamal Zamani, Rui M. Guedes, Fernando J. Ferreira
    MECHANICS OF TIME-DEPENDENT MATERIALS, Vol. 19, pp.1132-1145, 2015
76. "Physical constitutive equations for plastic deformation of FCC metals subjected to high strain rate loading"
    E. Etemadi, Jamal Zamani, M. Jafarzadeh
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, 2015
77. "Analytical Investigation of Elastic Thin-Walled Cylinder and Truncated Cone Shell Intersection Under Internal Pressure"
    Jamal Zamani, ,
    JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, Vol. 136, 2014
78. ""
    Jamal Zamani, Mohammad hadi Hemati, Mahmoud Bidkhori
    Aerospace Mechanics, Vol. 10, pp.61-67, 2014
79. ""
    Jamal Zamani, Mohammad Vahab Mousavi, Seyed Mohammd Reza Khalili
    2014
80. "The Effect of the Relief Wave on the Uniformity of an Air Blast Load"
    Abolfazl Shoja Senobari, Gholamhossein Adabifirouzjaei, Masoud Ahmadniafeizabadi, Jamal Zamani
    PROPELLANTS EXPLOSIVES PYROTECHNICS, Vol. 39, pp.574-579, 2014
81. ""
    Jamal Zamani, , Mohammad Hallajisany
    Journal of Energetic Materials, Vol. 9, pp.63-73, 2014
82. "A new set-up to investigate plastic deformation of OFHC copper in high strain rate loading"
    Ehsan Etemadi, Jamal Zamani, Alessandro Francesconi , Mohammad Vahab Mousavi, Cinzia Giacomuzzo
    Modern Applied Science, Vol. 8, pp.94-106, 2014
83. ""
    Jamal Zamani, Ehsan Etemadi,
    2014
84. "High strain rate and plastic deformation response of FCC Metals by finite element method"
    Ehsan Etemadi, Jamal Zamani, Mohammad Vahab Mousavi
    Advances in Mechanical Engineering, 2014
85. "Experimental and Numerical Investigation of Composite Conical Shells Stability Subjected to Dynamic Loading"
    , Jamal Zamani, Mohammad Shariyat, , ,
    STRUCTURAL ENGINEERING AND MECHANICS, Vol. 49, pp.555-568, 2014
86. "An experimental comparison on dimensional accuracy of wax patterns of gas turbine blades produced by rapid tooling"
    Jamal Zamani, Mohammad hadi Hemati,
    ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, Vol. 39, pp.7289-7297, 2014
87. ""
    Jamal Zamani, , Ehsan Yavari
    Vol. 2, pp.38-45, 2014
88. ""
    Jamal Zamani, , Ali Mozaffari,
    Vol. 8, pp.37-48, 2013
89. ""
    Jamal Zamani, , Ehsan Etemadi, Mohammad Vahab Mousavi
    2013
90. ""
    Jamal Zamani, Ehsan Yavari,
    Aerospace Mechanics, 2013
91. ""
    Jamal Zamani, , ,
    2013
92. "Constitutive modeling of polycarbonate during high strain rate deformation"
    , Jamal Zamani, ,
    POLYMER ENGINEERING AND SCIENCE, Vol. 53, pp.752-761, 2013
93. ""
    Jamal Zamani, Vahid Moosabeiki Dehabadi,
    2013
94. ""
    Jamal Zamani, , Ali Mozaffari
    2013
95. ""
    Jamal Zamani,
    Aerospace Mechanics, Vol. 9, pp.1-8, 2013
96. ""
    Jamal Zamani, Mohammad hadi Hemati,
    Aerospace Mechanics, 2013
97. ""
    Jamal Zamani, Vahid Moosabeiki Dehabadi
    Vol. 26, pp.243-256, 2013
98. "The analytical solution of the buckling of composite truncated conical shells under combined external pressure and axial compression"
    Mohammad Ali Boorboor Ajdari, , , Jamal Zamani, Mohammad Shariyat
    Journal of Mechanical Science and Technology, Vol. 26, pp.2783-2791, 2012
99. ""
    , Jamal Zamani, Hossein Siadati,
    Amirkabir Journal of Mechanical Engineering, Vol. 44, pp.113-119, 2012
100. ""
     Jamal Zamani
     pp.39-64, 2012
101. "Theoretical experimental and numerical investigation on the behaviour of tubular shells under internal blast loading"
     , Jamal Zamani,
     Journal of Mechanical Engineering Science, Vol. 226, pp.1683-1692, 2011
102. ""
     Omid Mir Mohammad Sadeghi, Jamal Zamani,
     Journal of Modern Processes in Manufacturing and Production, Vol. 1, pp.61-69, 2011
103. ""
     Jamal Zamani, , Majid Soleimani Chahestani,
     ISME Journal, Vol. 13, pp.39-63, 2011
104. ""
     Jamal Zamani
     Aerospace Mechanics, 2010
105. ""
     Jamal Zamani
     pp.41-49, 2010
106. "A New Approach To Predict of Mechanical Properties At The Interface of Aluminum /Copper Explosive C"
     Jamal Zamani
     pp.1-10, 2010
107. ""
     Jamal Zamani
     Aerospace Mechanics, pp.13-27, 2010
108. ""
     Jamal Zamani
     Aerospace Mechanics, pp.27-41, 2010
109. ""
     Jamal Zamani
     pp.27-36, 2010
110. ""
     Jamal Zamani
     pp.24-33, 2009
111. "Explosive scarf welding of aluminum to copper plates and their interface properties"
     Jamal Zamani
     MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, pp.655-719, 2009
112. ""
     Jamal Zamani
     pp.47-57, 2009
113. ""
     Jamal Zamani
     pp.73-82, 2009
114. ""
     Jamal Zamani
     pp.24-28, 2008
115. "Theoretical and experimental analysis of plastic response of isotropic circular plates subjected to"
     Jamal Zamani
     MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2008
116. ""
     Jamal Zamani
     pp.24-33, 2008
117. "Experimental Analysis of the folding force in thin wall extruded cells under quasi-static in-plane l"
     Jamal Zamani
     MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2008

Conference Paper

1. ""
   Jamal Zamani
   اندازه گيري ايمپالس حاصل از بارگذاري انفجاري با استفاده از نرم افزار AUTODYN,
2. ""
   Jamal Zamani
   نسبت فشار واماندگي ديناميك به استاتيك در ورق هاي دايروي كاملا گيردار تحت بارگذاري با نرخ كرنش بالا,
3. ""
   Jamal Zamani
   بررسي نفوذ پرتابه هاي تلسكوپي در مقايسه با پرتابه هاي ميله اي بلند در اهداف فلزي با شرائط مرزي مختلف,
4. "The 12th international conference on materials science & metallurgical engineering"
   Danyal Moradi, Jamal Zamani
   طراحي و ساخت سامانه ساخت افزايشيFDM با مكانيزم حركتي رباتيك اسكارا, 2023
5. "The 12th international conference on materials science & metallurgical engineering"
   Allahyar Ashrafi abyaneh, Jamal Zamani, Seyedali Ranjbaran
   بهينه سازي كنترل يك چاپگر سه بعدي اسكارا و تعيين زاويه بهينه بين بازوها بر اساس سيستم عامل مارلين, 2023
6. "The 12th international conference on materials science & metallurgical engineering"
   Mohammad Pourentezari, Jamal Zamani, AmirHossein Rahimi
   بهينه سازي ماده خام اوليه و درصد اجزاء مناسب سيستم بايندر جهت ساخت افزايشي قطعات فلزي با پودر فولاد كم آلياژ به روش FDMS, 2023
7. "The 12th international conference on materials science & metallurgical engineering"
   Mahdi Sarhaddi sarinasirloo, Jamal Zamani, Jose Albelda Vitoria
   طراحي و ساخت يك سامانه ساخت افزايشي از نوع DLPبا تمركز بر بومي سازي تكنولوژي ساخت سامانه و بهينه سازي پارامتر هاي فرآيند, 2023
8. "The 12th international conference on materials science & metallurgical engineering"
   Allahyar Ashrafi abyaneh, Jamal Zamani
   طراحي،ساخت و بهينه سازي كنترل يك سامانه ي ساخت افزايشي بر پايه ربات اسكارا, 2023
9. "The 12th international conference on materials science & metallurgical engineering"
   Mohammad Salehi, Jamal Zamani, Jose Albelda Vitoria, SIAVASH MOAYEDI MANIZANI
   Increasing the dimensional accuracy of parts by using two techniques of optical absorbers and determining the initial distance by photopolymerization method, 2023
10. "The 12th international conference on materials science & metallurgical engineering"
    Mahdi Sarhaddi sarinasirloo, Jamal Zamani, Jose Albelda Vitoria
    كاهش اثر نيروي جدايش بين قطعه و مخزن رزين در سامانهDLP با مكانيزم فيزيكي, 2023
11. "The 12th international conference on materials science & metallurgical engineering"
    Danyal Moradi, Ali Nasajpoor, Jamal Zamani
    بررسي تاثير فريت بر ترك گرم فولاد زنگ نزن آستنيتي, 2023
12. "ICME2019"
    Ata Abdi, Jamal Zamani,
    EFFECT OF POWDER DENSITY AND ENERGY DENSITY ON THE PROCESS PARAMETERS OF LASER MELTED PARTS, 2019
13. "2nd International Biennial Oil, Gas and Petrochemical Conferenc"
    Hamidreza Nasari, Jamal Zamani, Mir masoud Bagheri
    Modeling of Possible Accident in a Gas Compressor Station Using PHAST, 2019
14. ""
    Jamal Zamani, Forough Sardarzadeh
    بررسي و اندازه گيري تغييرات فشار ديناميك در لوله شوك ديافراگمي, 2019
15. "2nd national conference on applied mechanical engineering"
    Hamidreza Nasari, Jamal Zamani, Masoud M irbagheri
    بررسي پارامترهاي مخرب حوادث محتمل در يك ايستگاه تقويت فشار گاز, 2018
16. ""
    Mohammad Hallajisany, Jamal Zamani
    بررسي مدل هاي پارامتر گرونايزن در محاسبه دماي انواع بارگذاري و دماي باقي مانده در بارگذاري شوك, 2016
17. "International Conference on recent Innovations in Engineering and Technology (ICRIET)"
    Jamal Zamani
    Mechanical and Abrasive Consideration of Additives Effects On the Carbon Fabric/Phenolic Composites, 2016
18. "24th Annual International Conference on Mechanical Engineering (ISME2016)"
    Ehsan Etemadi, Jamal Zamani, morteza jafarzadeh
    تحليل تئوري افزايش دما در اثر انتشار موج الاستيك-پلاستيك در فلزات FCC در نرخ كرنشهاي بالا, 2016
19. "22nd Annual International Conference on Mechanical Engineering (ISME 2014)"
    Jamal Zamani, Seyed Mohammad Molavi
    آناليز تجربي جاذب هاي انرژي با ديواره منفرد و دوبل شده جدار نازك تحت بارگذاري شبه استاتيكي Out Of Plane, 2014
20. "13th Conference of Iranian Aerospace Society"
    Seyed Mohammad Molavi, Ehsan Etemadi, Jamal Zamani, Mohammad Vahab Mousavi
    مدلسازي عددي ضربه ورق به منظور مطالعه رفتار پلاستيكي فلز مس در نرخ كرنشهاي بالا, 2014
21. "Joint International Conference on Engineering Education and Research and International Conference on Information Technology (ICEE/ICIT 2013)"
    Jamal Zamani, Vahid Moosabeiki Dehabadi,
    The Study of Various Additives of Carbon Fabric/Phenolic Composites and Its Effects on the Mechanical Thermal and Abrasive Characteristics with Autoclave Method, 2013
22. "21st Annual International Conference on Mechanical Engineering"
    Vahid Moosabeiki Dehabadi, Jamal Zamani
    بررسي انواع روش هاي شبيه سازي موج شوك در شكل دهي انفجاري, 2013
23. "21st Annual International Conference on Mechanical Engineering"
    Mohsen Mosayebnezhad, Sina Azami, Jamal Zamani, Omid Pourali
    Design and Fabrication of a Valveless Pulsejet Engine, 2013
24. "21st Annual International Conference on Mechanical Engineering"
    Jamal Zamani, Ehsan Etemadi, Mohammad Vahab Mousavi
    Numerical Analysis of OFHC Copper Behavior under High Strain Rate Loading, 2013
25. "21st Annual International Conference on Mechanical Engineering"
    Jamal Zamani
    شبيه سازي شكل پذيري محيط واسط در انفجار زير آب در اثر ماده منفجره هاي متفاوت, 2013
26. "15th Iranian Seminar of Physical Chemistry"
    Jamal Zamani
    تحليل آماري دقت ابعادي الگوهاي مومي بكار رفته در ريخته گري دقيق پره هاي توربين, 2012
27. "15th Iranian Seminar of Physical Chemistry"
    Jamal Zamani
    آناليز تجربي هاني كمب تحت بارگذاري هاي ديناميكي حاصل از موج انقجار, 2012
28. "15th Iranian Seminar of Physical Chemistry"
    Jamal Zamani
    طراحي و ساخت سيستم فايبر اپتيك براي انتقال پرتو ليزر در دستگاه نمونه سازي سريع استريوليتوگرافي, 2012
29. ""
    Jamal Zamani, M abbasi
    Experimental investigation of strain rate dependent behavior of aluminum cylindrical shells under internal pressure loading ranging from statically to explosive, 2012
30. ""
    Jamal Zamani
    شبيه سازي شكل گيري جت حاصل از خرج گود و نفوذ آن در هدف فلزي بكمك LS-DAYNA, 2011
31. ""
    Jamal Zamani
    طراحي و ساخت يك سيستم كامپوزيتيخود ترميم با استفاده از ميكرو كپسول هاي شيشه, 2010
32. ""
    Jamal Zamani
    مود شكست لوله در فرآيند هيدرو فرمينگ, 2010
33. ""
    Jamal Zamani
    ارائه يك مدل رياضي جهت تعيين ميزان انرژي جذب شده بر اساس تكنيك الگريتم ژنتيك و نيروال نتورك, 2010
34. ""
    Jamal Zamani
    تاثير پارامترهاي فرآيند بر ميزان گوي شدگي در تف جوشي نيروي مخلوط پودر آهن و مس ،, 2010
35. ""
    Jamal Zamani
    Modeling of High Velocity Impact in Sandwich Beams with FGM Core, 2010
36. ""
    Jamal Zamani
    تاثير فشار كوبشي در قطعات توليد شده از طريق ذوب جزيي پودر استيل, 2010
37. ""
    Jamal Zamani
    توليد فوموفلزي سلول بسته استحكام بالا با استفاده از روش ريخته گري, 2010
38. ""
    Jamal Zamani, Mohammad Hallajisany
    بررسي اثر مدل هاي مختلف پارامتر گرونايزن در محاسبه دماي بارگذاري ايزنتروپيك و شوك و دماي باقي مانده در بارگذاري شوك در محدوده انفجار, 2009
39. ""
    Jamal Zamani, Mohammad Hallajisany
    بررسي اثر مدل هاي مختلف پارامتر گرونايزن در محاسبه دماي بارگذاري ايزنتروپيك و شوك و دماي باقي مانده در بارگذاري شوك در محدوده انفجار, 2009
40. ""
    Jamal Zamani
    پيش بيني فروريزش پلاستيك پوسته هاي مخروطي تحت فشار داخلي استاتيكي به روش تحليلي, 2009
41. ""
    Jamal Zamani
    Experimental And Numerical Analysis of Dynamic Response of Cone-Cylinder Intersection Under Explosiv, 2009
42. ""
    Jamal Zamani
    اندازه گيري ايمپالس حاصل از انفجار ماده منفجره با سازه و بدون سازه توسط يك دستگاه ايمپالس متر و مقا, 2009
43. ""
    Jamal Zamani
    Analytical Investigation of Cylindrical Shell with Truncated Cone under Internal Pressure Load, 2009
44. ""
    Jamal Zamani
    Numerical Simulation and Experimental Investigation of EFP Jet, 2009
45. ""
    Jamal Zamani
    Prediction of static internal pressure load for plastic collapse of truncated cone, 2009
46. ""
    Jamal Zamani
    Numerical and Experimental analysis of fully clamped thin plates subjected to air-blast, 2009
47. ""
    Jamal Zamani
    Investigation on Ablating Behaviour of Carbon / Phenolic (C/P) Composites Prepared with Different i, 2009
48. ""
    Jamal Zamani
    Manufacturing of carbon fabric/phenolic composites with autoclave method, 2009
49. ""
    Jamal Zamani
    Investigation of the Interaction between Interfacial and Ablation Properties of Carbon Fabric/Phenol, 2009
50. ""
    Jamal Zamani
    Ablation characteristics of carbon fabric/phenolic composites in the presence of different additives, 2009
51. ""
    Jamal Zamani
    An experimental examination of rapid prototyping and rapid tooling Technologies in production of gas, 2009
52. ""
    Jamal Zamani
    Optimization of dimensional accuracy of wax models produced by rapid tooling in turbine blades inves, 2009
53. ""
    Jamal Zamani
    Experimental Analysis of the Behavior of Thin Walled Shells under Internal Pressure Loading with Dif, 2009
54. ""
    Jamal Zamani
    The Empirical Survey on the Effect of Using Media in Explosive Forming of Tubular Shells, 2009
55. ""
    Jamal Zamani
    The Experimental Analysis of the Influence of Using Media in Explosive Forming of Cylindrical Struct, 2009
56. ""
    Jamal Zamani
    Numerical Simulation of Formation and Penetration of the, 2009
57. ""
    Jamal Zamani
    آناليز تجربي رفتار سازه هاي جدار نازك استوانه اي تحت فشار ديناميك, 2009
58. ""
    Jamal Zamani
    بررسي اثر استفاده از محيط واسط در شكل دهي انفجاري سازه هاي استوانه اي جدار نازك, 2009
59. ""
    Jamal Zamani
    بررسي تحليلي و تجربي شكل دهي انفجاري ورقهاي جدار نازك دايروي, 2009
60. ""
    Jamal Zamani
    آناليز تجربي شكل دهي سازه هاي جدار نازك با استفاده از محيط واسط آب, 2009
61. ""
    Jamal Zamani
    بررسي تحليلي و تجربي شكل دهي انفجاري پوسته هاي نازك آلومينيومي, 2009
62. ""
    Jamal Zamani
    اتصال اسكارف فلزات آلومينيوم به مس بوسيله جوشكاري انفجاري, 2009
63. ""
    Jamal Zamani
    ارايه روشي نوين در نمونه سازي سريع و بررسي نحوه ي عملكرد آن, 2009
64. ""
    Jamal Zamani
    ارائه مدل نيمه تجربي براي شكل دهي ديناميكي پوسته هاي استوانه- مخروط آلومينيومي, 2009
65. ""
    Jamal Zamani
    بررسي تجربي رفتار سازه هاي استوانه-مخروط و مقايسه با پوسته هاي استوانه اي با شعاع يكسان, 2009
66. ""
    Jamal Zamani
    اندازه گيري تجربي ايمپالس حاصل از انفجار در هوا بوسيله دستگاه ايمپالس متر, 2009
67. ""
    Jamal Zamani
    بررسي عوامل موثر بر تغيير شكل سازه هاي استوانه اي جدار نازك تحت بارگذاري انفجاري در قالب يك پارامتر, 2009
68. ""
    Jamal Zamani
    پاسخ ديناميك-پلاستيك سازه سرجنگي تحت بارگذاري انفجاري, 2009
69. ""
    Jamal Zamani
    اندازه گيري اثر سازه حامل بر ايمپلس حاصل از انفجار توسط يك دستگاه ايمپالس متر, 2009
70. ""
    Jamal Zamani
    اثر نرخ كرنش بر تغيير شكل و شكست پوسته هاي جدار نازك فلزي تحت بارگذاري ديناميكي, 2009
71. ""
    Jamal Zamani
    آناليز تجربي اثر استفاده از محيط واسط در بارگذاري انفجاري سازه هاي استوانه اي جدار نازك, 2009
72. ""
    Jamal Zamani
    بررسي پارامتر هاي موثر نيروي تماس در بارگذاري ضربه اي بر تير ساندويچي با هسته FGM, 2009
73. ""
    Jamal Zamani
    Energy Absorption consideration of thin-walled Extruded Square Tubes by Experimental and Numerical M, 2008
74. ""
    Jamal Zamani
    The Effect of Various Reinforcements on The Ablation Thermal and Microstructural Properties of Phen, 2008
75. ""
    Jamal Zamani
    Experimental folding Analysis of circular cylindrical tubes under in-plane loading, 2008
76. ""
    Jamal Zamani
    Theoretical and Experimental Analysis of Plastic Response of Isotropic Plates under blast Loading, 2008
77. ""
    Jamal Zamani
    كاربرد ابزار سازي سريع در توليد الگوهاي مومي به كار رفته در فرآيند ريخته گري دقيق پره هاي توربين گاز, 2008
78. ""
    Jamal Zamani
    تاثير افزودنيهاي مختلف بر خواص مكانيكي، حرارتي و فداشوندگي كامپوزيتهاي كربن/ فنوليك, 2008
79. ""
    Jamal Zamani
    بررسي تاپير روش ساخت كامپوزيت هاي كربن/ فنوليك بر مقاومت فداشوندگي آنها, 2008
80. "The 7th Conference of Iranian Aerospace Society"
    Jamal Zamani
    بررسي و تحليل انقباضات و انحرافات ابعادي مومهاي به كار رفته در ساخت پره هاي توربين گازي, 2008
81. "The 7th Conference of Iranian Aerospace Society"
    Jamal Zamani
    بررسي تحليلي و عددي اتصال مخروط ناقص و استوانه جدار نازك تحت فشار داخلي, 2008
82. "The 7th Conference of Iranian Aerospace Society"
    Jamal Zamani
    بررسي تحليلي و تجربي نسبت به نرخ كرنش در يك ورق ايزوتروپ با شرائط مرزي مشخص تحت بارگذاري انفجاري زير, 2008
83. ""
    Jamal Zamani
    شبيه سازي تجربي رفتار سازه هاي بتوني در بارگذاري هاي حاصل از موج انفجار, 2007
84. ""
    Jamal Zamani
    آناليز عددي رفتارخمشي بتون تحت بارگذاري موج حاصل از انفجار - دومين همايش مقابله با سوانح طبيعي, 2007
85. ""
    Jamal Zamani
    ساخت كامپوزيتهاي مقاوم به شوكهاي انفجاري, 2007
86. ""
    Jamal Zamani
    Design and manufacturing of a new 3D-Printing machine based on piezoelectric head technology, 2007
87. ""
    Jamal Zamani
    Dynamic to Static collapse pressure ratio of circular plates under blast loading, 2007
88. ""
    Jamal Zamani
    Manufacturing of Carbon Fabric / Phenolic Composites with Autoclave Method, 2007
89. ""
    Jamal Zamani
    The effect of various additives on the interfacial thermal ablative properties of carbon/phenoli, 2007
90. ""
    Jamal Zamani
    Plastic response of thin plates under high strain rate loading, 2007
91. ""
    Pooria Pasbakhsh , Jamal Zamani, Ali Shkoohfar, Mehdi Zohoor
    طراحي و ساخت كامپوزيت مقاوم به تنش هاي حرارتي, 2006
92. ""
    Jamal Zamani
    بررسي تحليلي و تجربي تغير شكل يك سازه ايزوتروپ تحت بارگذاري موج شوك با محيط واسط سيال, 2005
93. ""
    Mehdi Zohoor, Jamal Zamani,
    ارائه يك روش كلي براي آناليز اكستروژن مستقيم تقارن محوري, 2003
94. ""
    Jamal Zamani
    A Finit Element Analysis of Polymers in Split Hopkinson Pressure Bar to Investigate Wave Propagation, 1991
95. ""
    Jamal Zamani
    Experimental and numerical analysis of energy absorption On thin-walled extruded square tubes under, 1991
96. ""
    Jamal Zamani
    Effect of Strain Rate Temperature on Mechanical of Glass Fiber Reinforced metal Laminates an Exp, 1991
97. ""
    Jamal Zamani
    Constitutive Model for High Strain Rate Deformation of Amorphous Polymers, 1991