Cyrus Aghanajafi

Journal Paper

1. ""
   Cyrus Aghanajafi
   pp.173-178,
2. "Multi objective optimization of a cogeneration plant for supplying given amount of power"
   Cyrus Aghanajafi
   DESALINATION, pp.225-234,
3. "simulation and optimization of multi effect desalination to a gas turbine"
   Cyrus Aghanajafi
   DESALINATION, pp.366-376,
4. "A hybrid optimization alogorithm for thermal design of radiation paint cure oven"
   Cyrus Aghanajafi
   APPLIED THERMAL ENGINEERING,
5. "MHD non darcian flow through a non isothermal vertical surface embeded in a pourous medium"
   Cyrus Aghanajafi
   MECCANICA, pp.929-939,
6. "optimization of solar collector surface in solar desicant wheel cycle"
   Cyrus Aghanajafi
   ENERGY AND BUILDINGS, pp.197-201,
7. "Slip flow heat transfer in circular microchannel with viscous dissipation"
   Cyrus Aghanajafi
   pp.201-210,
8. ""
   Cyrus Aghanajafi
   pp.33-38,
9. "investigation the optimal tool path strategies based on machining"
   Cyrus Aghanajafi
   AUSTRALIAN JOURNAL OF BASIC AND APPLIED SCIENCES, pp.2320-2326,
10. "description and modelling of RP technology for aerodynamics coefficents measurements"
    Cyrus Aghanajafi
    AUSTRALIAN JOURNAL OF BASIC AND APPLIED SCIENCES, pp.2685-2689,
11. "description and modelling of additive manufacturing technology for aerodynamics coefficents measurem"
    Cyrus Aghanajafi
    STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING,
12. ""
    Cyrus Aghanajafi
    pp.67-74,
13. "entropy generation analysis of microscale forced convection in thermal"
    Cyrus Aghanajafi
    JOURNAL OF MECHANICS, pp.71-76,
14. "A new approach for simulation of annular two phase flow considering the involvedmass transfer"
    Cyrus Aghanajafi
    pp.2677-2685,
15. "developing the proper form of objective function to be applied in gradient optimization technique"
    Cyrus Aghanajafi
    pp.2260-2267,
16. "sifting through the optimal strategies of time based tools path"
    Cyrus Aghanajafi
    MIDDLE EAST JOURNAL OF SCIENTIFIC RESEARCH, pp.844-849,
17. "the comparative investigation for calculating the temperatures in the hottest fuel rod of busher"
    Cyrus Aghanajafi
    pp.120-125,
18. "Numerical study on temperature distribution and emission characteristics of Ozone-Assisted combustion in flash smelting furnaces"
    Neda Rajabi khoshandam, Cyrus Aghanajafi
    FUEL, Vol. 408, pp.137628-137638, 2026
19. "effect of cancer-induced hemodynamic changes in single leukocyte dynamics in a venule using the object in fluid module"
    Tahereh Zarei, Majid Soltani, Cyrus Aghanajafi
    COMPUTERS IN BIOLOGY AND MEDICINE, Vol. 204, pp.28-50, 2026
20. "effects of successive pool boiling cycles of sio2 nanofluids on boiling surface stability role of concentration dependent stability and post stabilization dilution"
    m heidari, masoud zareh, Cyrus Aghanajafi, behshad shafei
    Results in Engineering, pp.125-150, 2026
21. "optimization and thermodynamic analysis of five pad tilting pad journal bearing with MOPSO algorithm"
    Seyedeh zahra Mikaeeli, Cyrus Aghanajafi
    INDUSTRIAL LUBRICATION AND TRIBOLOGY, Vol. 4, pp.626-642, 2025
22. "Numerical simulation and PSO-based analysis of NO?, CO, and CO2 emissions in MILD combustion of methane/ammonia/hydrogen blends with steam addition"
    Neda Firooznia, Cyrus Aghanajafi
    Results in Engineering, Vol. 28, pp.107741-107751, 2025
23. "Enhancing heat transfer and flow control with porous plates around a square cylinder"
    Mohammadjavad Javadzadeh, Cyrus Aghanajafi
    International Journal of Thermofluids, Vol. 28, pp.101439-101450, 2025
24. "Nonlinear vortex-induced vibrations analysis of a horizontal circular cylinder system with gap"
    Abbas Rahimli, Ali Asghar Jafari, Cyrus Aghanajafi
    Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 47, pp.659-675, 2025
25. "Numerical Investigation and Multi-Objective Optimization of Natural Gas MILD Combustion with Different Additives"
    Neda Firooznia, Cyrus Aghanajafi
    COMBUSTION SCIENCE AND TECHNOLOGY, pp.1-19, 2025
26. "Cooling optimization of developing, pulsating, incompressible airflow through a 4-rifled aluminum microtube using statistical approach based on analysis of variance (ANOVA)"
    Farhad Mirzabaghi, Mohammad Hassan Saidi, Cyrus Aghanajafi
    Results in Engineering, Vol. 27, pp.105566-105576, 2025
27. "energy harvesting from vortex induced vibration for circular horizontal cylinder system with gap"
    mohammad rahimly, Ali Asghar Jafari, Cyrus Aghanajafi
    Vol. 12, pp.37-46, 2025
28. "Mitigating carbon monoxide emissions in natural gas MILD combustion: analyzing the impact of additives through Taguchi optimization"
    Neda Firooznia, Cyrus Aghanajafi
    International Journal of Environmental Science and Technology, Vol. 22, pp.9049-9062, 2025
29. "numerical analysis of heat transfer and teperature distribution in direct metal laser sintering method"
    farshid rajabi, arman maroufi, Cyrus Aghanajafi, mohamad kasaei
    International Journal of Advanced Design and Manufacturing Technology, Vol. 14, pp.18-30, 2024
30. "Investigating the power and efficiency of the 3D model of the concentrated photovoltaic thermoelectric hybrid system and estimating the power consumption of the water pump for cooling"
    Milad Adelifar, Cyrus Aghanajafi
    ENERGY, Vol. 306, 2024
31. "Analytical and numerical analysis of heat transfer and temperature distribution in laser sintering method"
    Farshid Rajabi Varedehsaraei, Arman Maroufi, Cyrus Aghanajafi, Mohammad Mehdi Kasaei
    Journal of Mechanical Science and Technology, Vol. 38, pp.5531-5541, 2024
32. "Numerical Analysis of Time Dependent Temperature Distribution inside a Solar Greenhouse"
    Cyrus Aghanajafi, Mahya Mohammadi
    International Journal of Advanced Design and Manufacturing Technology, Vol. 17, pp.51-60, 2024
33. "Numerical Analysis of Heat Transfer and Temperature Distribution in Direct Metal Laser Sintering Method"
    Farshid Rajabi, Arman Maroufi, Cyrus Aghanajafi, Mohammad Mehdi Kasaei
    International Journal of Advanced Design and Manufacturing Technology, Vol. 14, pp.10-30, 2024
34. "Investigation into the two-way interaction of coronary flow and heart function in coronary artery disease predicted by a computational model of autoregulation of coronary flow"
    Hosein Ramezani kharvani, Cyrus Aghanajafi
    JOURNAL OF BIOMECHANICS, Vol. 164, pp.1-5, 2024
35. "Enhancing MILD Combustion of Natural Gas with Additives: A Taguchi Method Approach for CO2 Emission Reduction"
    Neda Firooznia, Cyrus Aghanajafi
    ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, Vol. 10, pp.50-65, 2024
36. "Experimental investigation on the ferrofluid flow in a horizontal mini channel under the constant magnetic field using PIV"
    Saeed Fateh, Mohammad Behshad Shafii, Mohammad Najafi, Cyrus Aghanajafi
    POWDER TECHNOLOGY, Vol. 431, 2023
37. "investigation of the evolution of tumor induced microvascular network under the inhibitory effect of anti angiogenic factor angiostatin"
    Mahya Mohammadi, Majid Soltani, Cyrus Aghanajafi, mohammad kohandel
    Mathematical Biosciences and Engineering, Vol. 20, pp.5448-5480, 2023
38. "Computational Multi-Scale Modeling of Drug Delivery into an Anti-Angiogenic Therapy-Treated Tumor"
    Mahya Mohammadi, Mostafa Sefidgar, Cyrus Aghanajafi, Mohammad Kohandel, Majid Soltani
    Cancers, Vol. 15, 2023
39. "enhancing efficiency of a renewable energy assisted system with adiabatic compressed air energy storage by application of multiple kalina recovery cycles"
    Ali Piri, Cyrus Aghanajafi, Ali Sohani
    Journal of Energy Storage, Vol. 61, pp.47-73, 2023
40. "Numerical Investigation on the Anti-Angiogenic Therapy-Induced Normalization in Solid Tumors"
    Mahya Mohammadi, Cyrus Aghanajafi, Majid Soltani, Kaamran Raahemifar
    Pharmaceutics, Vol. 14, pp.1-25, 2022
41. "Simulation of the role of the anti-angiogenic therapy in fluid flow behavior and macromolecule transport into a heterogeneous solid tumor"
    Mahya Mohammadi, Cyrus Aghanajafi, Majid Soltani
    Amirkabir Journal of Mechanical Engineering, Vol. 54, pp.22-43, 2022
42. "Numerical investigation on the anti-angiogenic therapy- induced normalization in solid tumor"
    Mahya Mohammadi, Cyrus Aghanajafi, Majid Soltani, kamran raahemifar
    Pharmaceutics, Vol. 14, pp.1-25, 2022
43. "Analysis of combined radiation and convection heat transfer inside a porous medium with heat source electronic devices"
    ali mokhtari nahal, mohammad nobakhti, Cyrus Aghanajafi, m khayat
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, Vol. 32, pp.156-176, 2022
44. "Multi objective optimization and exergoeconomic evaluation of a hybrid geothermal PVT system integrated with PCM"
    Maryam Abbasi Kamazani, Cyrus Aghanajafi
    ENERGY, Vol. 240, pp.1-17, 2022
45. "An experimental investigation of microstructure surface roughness on pool boiling characteristics of TiO2 nanofuid"
    Mahdi Roodbari, Hasan Alimoradi Chamgordani, Mehrzad Shams, Cyrus Aghanajafi
    JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, pp.1-16, 2022
46. "optimization of cooling of three radiant heat source inside an inclined porous medium using particle swarm optimization"
    ali mokhtari nahal, mohammad nobakhti, Cyrus Aghanajafi, morteza khyat
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, Vol. 236, pp.43-58, 2022
47. "Analyzing the sensitivity and energy efficiency of a residential complex in warm and dry climate of Iran Acase study Yazd provinces"
    a baheri, mh najafi, a azimi, Cyrus Aghanajafi
    International Journal of Environmental Science and Technology, Vol. 56, pp.653-669, 2021
48. "A novel numerical investigation of erosion wear over various 90 degree elbow bed sections"
    Mohammad Hossein Zolfagharnasab, Milad Salimi, h zolfghar nasab, Hasan Alimoradi Chamgordani, Mehrzad Shams, Cyrus Aghanajafi
    POWDER TECHNOLOGY, Vol. 380, pp.346-362, 2021
49. "A novel numerical investigation of erosion wear over various 90-degree elbow duct sections"
    Mohammad Hossein Zolfagharnasab, M. Salimi, H. Zolfagharnasab, Hasan Alimoradi Chamgordani, Mehrzad Shams, Cyrus Aghanajafi
    POWDER TECHNOLOGY, Vol. 380, pp.1-17, 2021
50. "Computational investigation of dust settlement effect on power generation of three solar tracking photovoltaic modules using a modified angular losses coefficient"
    Tahereh Zarei, Morteza Abdolzadeh, Majid Soltani, Cyrus Aghanajafi
    SOLAR ENERGY, Vol. 222, pp.269-289, 2021
51. "Sensitivity analysis and energy optimization of building a residential complex in warm and semi humid climate of Iran (Dezful)"
    a baheri, m najafi, a azimi, Cyrus Aghanajafi
    Energy Equipment and Systems, Vol. 9, pp.71-90, 2021
52. "Exergy economic and environmental evaluation of an optimized hybrid photovoltaic geothermal heat pump system"
    s kavian, Cyrus Aghanajafi, Hassan Jafari Mosleh, Ashkan Nazari, Arash Nazari
    APPLIED ENERGY, Vol. 276, pp.124-138, 2021
53. "Optimization techniques for design a shell and tube heat exchanger from economic viewpoint"
    h karimi, h danesh astiani, Cyrus Aghanajafi
    AUT Journal of Mechanical Engineering, Vol. 5, pp.9-18, 2021
54. "A simplified analytical model to predicting the heating performance of single u-tube underground heat exchangers"
    m mohamadian korouyeh, mh saidi, m najafi, Cyrus Aghanajafi
    Scientia Iranica, Vol. 28, pp.847-859, 2021
55. "Selection of prime mover to meet heating demand of a single effect absorption chiller based on laws of thermodynamics"
    m korougeh, mh saidi, m najafi, Cyrus Aghanajafi
    SN Applied Sciences, Vol. 56, pp.543-556, 2021
56. "Utilization of thermoelectric technology in converting waste heat in to electrical power required by an impressed current cathodic protection system"
    f delfani, n rahbar , Cyrus Aghanajafi, a haydari, a khalesdoost
    APPLIED ENERGY, Vol. 302, pp.1-15, 2021
57. "Application of non pressure based coupled procedures for the solution of heat and mass transfer for incompresible fluid flow phenomenon"
    Mohammad Hossein Zolfagharnasab, Milad Salimi, Cyrus Aghanajafi
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, Vol. 181, pp.1-23, 2021
58. "An experimental investigation of microstructure surface roughness on pool boiling characteristics of tio2 nanofluid"
    Mahdi Roodbari, Hasan Alimoradi Chamgordani, Mehrzad Shams, Cyrus Aghanajafi
    JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, Vol. 15, pp.56-70, 2021
59. "Numerical solution of coupled radiative and conductive heat transfer,s equation in polymethylMethacrylate by the finite difference method"
    Seyed Milad Mousavi, Cyrus Aghanajafi
    Radiation Effects and Defects in Solids, Vol. 176, pp.638-650, 2021
60. "Numerical simulation of geothermal-PVT hybrid system with PCM storage tank"
    Maryam Abbasi Kamazani, Cyrus Aghanajafi
    INTERNATIONAL JOURNAL OF ENERGY RESEARCH, Vol. 46, pp.1-18, 2021
61. "A simplified model to predict and optimize energy consumption of residential buildings in the cold climate regions of Iran"
    a baheri, m najafi, m azimi, Cyrus Aghanajafi
    Energy Sources Part A-Recovery Utilization and Environmental Effects, Vol. 5, pp.124-132, 2020
62. "Novel analysis of second law and irreversibility for a solar power plant using heliostat and molten salt"
    Mohammad Hossein Zolfagharnasab, Cyrus Aghanajafi, s kavian, Niloufar Heydarian, mh ahmadi
    Energy Science and Engineering, Vol. 8, pp.4136-4153, 2020
63. "Nonisothermal two phase modeling of the effect of linear nonuniform catalyst layer on polymer electrode membrane fuel cell performance"
    s sabzpoushan, h jafari mosleh, s kavian, m safari pour, omid mohamadi, Cyrus Aghanajafi, m.h ahmadi
    Energy Science and Engineering, Vol. 8, pp.3575-3587, 2020
64. "Optimization of the total annual cost in mixed material heat exchanger network by detailed equip design using particle swarm technique"
    h karimi, h danesh ashtiani, Cyrus Aghanajafi
    International Journal of Thermodynamics, Vol. 23, pp.216-223, 2020
65. "thermodynamic and economic investigation of a novel integration of the absorption-recompression refrigration system with compressed air energy storage (CAES)"
    Amir Reza Razmi, Majid Soltani, Cyrus Aghanajafi, m torabi
    ENERGY CONVERSION AND MANAGEMENT, Vol. 187, pp.262-273, 2019
66. "Applying multiple decomposition methods and optimization technique for achieving optimal cost in mixed materials heat exchanger networks"
    h karimi, h ahnadi-danesh, Cyrus Aghanajafi
    INTERNATIONAL JOURNAL OF ENERGY RESEARCH, Vol. 43, pp.3711-3722, 2019
67. "Optimization of synthetic jet position for heat transfer enhancement and temperature uniformity of a heated wall in micro channels"
    jahanfar khaleginia, farshad kowsari, Cyrus Aghanajafi
    Journal of Applied Fluid Mechanics, Vol. 12, pp.20-36, 2019
68. "study of mixed materials heat exchnger using optimization technique"
    habib karimi, hossein ahnadi danesh, Cyrus Aghanajafi
    Journal of Engineering, Design and Technology, Vol. 5, pp.12-42, 2019
69. "investigation of the efficency of various reactive mufflers by noise reduction and transmission loss analyses"
    Mahya Mohammadi, seyed esmaeil razavi, Cyrus Aghanajafi, haidi khorand
    Journal of theoretical and Applied Vibration and Acoustics, Vol. 4, pp.125-145, 2019
70. "transient simulation and multi objective optimization of a vsd ground source heat pump in various usage"
    s kavian, Cyrus Aghanajafi, n didzaji
    ENERGY CONVERSION AND MANAGEMENT, Vol. 197, pp.46-65, 2019
71. "Optimization of the total annual cost in a shell and tube heat exchanger by ant colony optimization technique"
    h karimi, h ahmadi danesh, Cyrus Aghanajafi
    Vol. 12, pp.121-134, 2019
72. "Numerical study and parameter optimization of partial journal bearing using MOPSO algorithm"
    Seyedeh zahra Mikaeeli, Cyrus Aghanajafi, p akbarzadeh
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, Vol. 208, pp.23-38, 2019
73. "Numerical study and parameter optimization of partial journal bearing using MOPSO algorithm"
    Seyedeh zahra Mikaeeli, Cyrus Aghanajafi, p akbazadeh
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, Vol. 234, pp.145-158, 2019
74. "evaluation of desicant wheel and prime mover as combined cooling heating and power system"
    mohamad mohmadian, mohaamad sahdi, mohammad najafi, Cyrus Aghanajafi
    International Journal of Green Energy, Vol. 16, pp.22-53, 2019
75. "effects of fin spacing and gas radiation on heat transfer in utility boiler economizer"
    a hamzehpour, Cyrus Aghanajafi, h shokouhmand, m najafi
    Tehnicki Vjesnik-Technical Gazette, Vol. 26, pp.1764-1780, 2019
76. "Transient analysis of heat and mass transfer via natural convection over a vertical complex wavy surface"
    morteza ghadimi, , Cyrus Aghanajafi
    International Journal of Advanced Design and Manufacturing Technology, Vol. 11, pp.61-70, 2018
77. "Genetic algorithm approach to optimize a double effect absorption chiller with parabolic trough solar collector in tehran"
    azad hamzeh pour, saman badrang, Cyrus Aghanajafi, hossein shohouhmand
    applied research journal, Vol. 6, pp.2-14, 2017
78. "Effects of arrangement and phase difference of oscillation of syntetic jets on heat transfer in micro-channels"
    jahanfar khaleghinia, farshad kowsari , Cyrus Aghanajafi
    Mechanika, Vol. 23, pp.123-139, 2017
79. "A novel numerical approach for convective and radiative heat transfer analysis of fluid flow problems within triangular cavities using natural element method"
    Ardeshir Moftakhari, Cyrus Aghanajafi, moftakhari ardalan
    JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, Vol. 139, pp.164-178, 2017
80. ""
    Cyrus Aghanajafi,
    Vol. 3, pp.65-75, 2017
81. "TWO-DIMENSIONAL FE SIMULATION OF IMPACT LOADING ON ALUMINA MATRIX NANOCOMPOSITE REINFORCED BY DYNEEMA HB25 LAMINATES"
    , , Cyrus Aghanajafi
    JOURNAL OF MECHANICS, Vol. 4, pp.1-12, 2016
82. "The effect of temperature-dependent viscosity and thermal conductivity on micropolar fluid over a stretching sheet"
    Reza Keimanesh, Cyrus Aghanajafi
    Tehnicki Vjesnik-Technical Gazette, Vol. 24, pp.117-138, 2016
83. "Inverse heat transfer analysis of radiator central heating systems inside residential buildings using sensitivity analysis"
    Ardeshir Moftakhari, Cyrus Aghanajafi,
    INVERSE PROBLEMS IN SCIENCE AND ENGINEERING, Vol. 5, pp.1-28, 2016
84. "A novel energy simulation approach for thermal design of buildings equipped with radiative panels using inverse methodology"
    Ardeshir Moftakhari, Farshad Torabi, Cyrus Aghanajafi
    ENERGY AND BUILDINGS, Vol. 113, pp.169-184, 2016
85. "an inverse parameter estimation method for building thermal analysis"
    Ardeshir Moftakhari, Cyrus Aghanajafi
    JOURNAL OF SOLAR ENERGY ENGINEERING-TRANSACTIONS OF THE ASME, Vol. 138, pp.125-140, 2016
86. "The effects of local variation in thermal conductivity on heat transfer of a micropolar fluid flow over a porous sheet"
    Reza Keimanesh, Cyrus Aghanajafi
    International Journal of Advanced Design and Manufacturing Technology, Vol. 9, pp.19-25, 2016
87. "An innovative inverse analysis technique for building cooling design with HVAC systems"
    Ardeshir Moftakhari, Cyrus Aghanajafi,
    Science and Technology for the Built Environment (Formerly known as HVAC R Research), Vol. 22, pp.1-18, 2016
88. "thermal analysis of HVAC and solar panels using genetic optimization algorithm"
    Ardeshir Moftakhari, Cyrus Aghanajafi,
    Journal of Mechanical Science and Technology, Vol. 30, pp.1405-1415, 2016
89. "Aalysis of radiation heat transfer of a micropolar fluid with variable properties over a Stretching Sheet in the Presence of Magnetic Field"
    Reza Keimanesh, Cyrus Aghanajafi
    Journal of Heat and Mass Transfer Research, Vol. 3, pp.20-35, 2016
90. "a comparative study of HVAC and radiant systems for heating building in different climates of iran"
    Ardeshir Moftakhari, Cyrus Aghanajafi,
    INDIAN JOURNAL OF NATURAL SCIENCES, Vol. 6, pp.8615-8631, 2015
91. ""
    Hasan Haddadi, Cyrus Aghanajafi, Farshad Torabi
    Vol. 15, pp.209-220, 2015
92. "discrete ordinates method applied to radiative transfer equation in complex geometries meshed by structured and unstructured grids"
    Cyrus Aghanajafi, Arash Abjadpour
    Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 15, 2015
93. "optimization and investigation of multi-stage thermoelectric generation systems with particle swarm optimization (PSO)"
    , Cyrus Aghanajafi, Amin Kashi
    Journal of Electrical and Electronics Engineering, pp.1-15, 2014
94. "The Analysis of the Effect of Porosity Changes on the Casson Flow"
    Mohammad Reza Shahnazari, Zahra Ahmadi, Cyrus Aghanajafi
    Vol. 2, pp.1-8, 2014
95. "prediction of free convection from vertical and inclined rows of horizontal Isothermal cylinder Using ANFIS"
    karami alimohammad, tooraj yousefi, , Cyrus Aghanajafi
    ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, Vol. 2, pp.22-34, 2014
96. ""
    Mojtaba Baghban, Cyrus Aghanajafi, ac mansouri
    Aerospace Mechanics, Vol. 10, pp.13-21, 2014
97. "entropy generation analysis for various cross sectional ducts in fully developed laminar Convection with constant wall heat flux"
    m.s haghgooyan, Cyrus Aghanajafi
    Korean Chemical Engineering Research, Vol. 53, pp.23-36, 2014
98. "entropy generation analysis for microscale forced convection with radiation in thermal entrance regian"
    Cyrus Aghanajafi, Maziar Alasvand bakhtiarpoor, Mehran Taghipour,
    HEAT AND MASS TRANSFER, Vol. 6, pp.25-39, 2014
99. "increasing volumetric efficiency of peugeot engine xu7jp/l3 via optimization of air flow system"
    omid minoofar, Cyrus Aghanajafi, reza azarafza
    INDIAN JOURNAL OF NATURAL SCIENCES, Vol. 4, pp.37-52, 2014
100. "Fatigue durability analysis of collecting rapping system in electrogtatic precipitators under impact loadings"
     ali Neystanak, saeeed adib Nazari, Ali imam, Cyrus Aghanajafi
     Advances in Materials Science and Engineering, Vol. 10, pp.273-286, 2014
101. "experimental investigation of aqueous libr solution absorber bundle with horizontal elliptical tubes"
     ali Abyaneh, Mohamad hasan Saidi, Cyrus Aghanajafi
     HVAC and R RESEARCH, Vol. 20, pp.251-263, 2014
102. "optimization and investigation of multistage thermoelectric generation systems with particle swarm opyimization PSO"
     , Cyrus Aghanajafi, Amin Kashi
     amirkabir international journal of electrical and electronic engineering, Vol. 3, pp.237-247, 2014
103. "investigation of multi stage thermo electric system by pso method and ica optimization algorithm"
     Amin Kashi, Cyrus Aghanajafi
     Acta Technica Corviniensis - Bulletin of Engineering, Vol. 7, pp.54-69, 2014
104. "A novel approach on entropy production rate"
     , Cyrus Aghanajafi, Mohammad Khademi
     international journal of scientific and engineering research, Vol. 4, pp.180-187, 2013
105. ""
     , Cyrus Aghanajafi
     Vol. 15, pp.124-132, 2013
106. "investigation of rapid manufacturing technology effect on aerodynamics properties"
     , Cyrus Aghanajafi,
     Tehnicki Vjesnik-Technical Gazette, Vol. 20, pp.425-433, 2013
107. "Investigation of bioheat transfer equation of pennes VIA a new method based on WRM and homotopy perturbation"
     Mohammad Reza Shahnazari, Cyrus Aghanajafi, Milad Azimifar,
     International Journal Of Research And Reviews In Applied Sciences, Vol. 17, pp.1-9, 2013
108. "Investigation of rapid manufacturing technology with ABS material for wind tunnel models fabrication"
     , Cyrus Aghanajafi, Farhad Shahverdi
     JOURNAL OF POLYMER ENGINEERING, Vol. 32, pp.575-584, 2012
109. ""
     Cyrus Aghanajafi
     pp.51-59, 2012
110. "solution to radiative transfer equation in a three dimensional enclosure due to heat flow"
     Cyrus Aghanajafi
     MECCANICA, pp.192-204, 2012
111. "solution to radiative transfer equation in a 3-D rectangular enclosure due to discontinuous heat flow divergence"
     Cyrus Aghanajafi, Arash Abjadpour
     MECCANICA, Vol. 48, pp.1127-1128, 2012
112. "A new approach for process optimization of a metvc desalination system"
     Cyrus Aghanajafi
     Desalination and Water Treatment, pp.84-95, 2012
113. "thermo economic analysis of a desalination device from the second law of thermodynamics"
     Cyrus Aghanajafi
     pp.1-11, 2012
114. "optimal design of radiation paint cure ovens using a novel objective function"
     Cyrus Aghanajafi
     pp.240-250, 2012
115. "analytica simulation of annular two phase flow considering the four involved mass transferl"
     Cyrus Aghanajafi
     JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, pp.11301-91301, 2012
116. "analysis of conduction radiation heat transfer during phase change process of semitransparent materials using lattice boltzmann methods"
     Arman Maroufi, Cyrus Aghanajafi
     JOURNAL OF QUANTITATIVE SPECTROSCOPY and RADIATIVE TRANSFER, Vol. 1, pp.145-155, 2012
117. "numerical modeling of 2 - D solidification using lattice boltzman method with vary boundary conditi"
     Cyrus Aghanajafi
     ARCHIVE OF APPLIED MECHANICS, pp.156-165, 2012
118. "heat transfer simulation from a horizontal triangular fin array by natural convection"
     Cyrus Aghanajafi
     ARCHIVE OF APPLIED MECHANICS, pp.142-162, 2012
119. "blood flow simulation in magnetic bearing centrifugal pump"
     Cyrus Aghanajafi
     MECHANICAL ENGINEERING, pp.8211-8214, 2012
120. ""
     Cyrus Aghanajafi
     pp.57-66, 2012
121. "Studying the influence of refrigrant type on thermal efficiency of annular two phase flows"
     Cyrus Aghanajafi
     KOREAN JOURNAL OF CHEMICAL ENGINEERING, pp.49-55, 2011
122. "the effect of MHD on a porous fin attached to a vertical surface"
     Cyrus Aghanajafi
     TRANSPORT IN POROUS MEDIA, pp.215-231, 2010
123. "the effect of chromium coating in rp technology for airfoil manufacturing"
     Cyrus Aghanajafi
     SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, pp.569-576, 2010
124. "vibration analysis of a composite elliptical shell"
     Cyrus Aghanajafi
     AUSTRALIAN JOURNAL OF BASIC AND APPLIED SCIENCES, pp.1542-1554, 2010
125. "dynamic optimization o f aradiation paint cure oven using the nomial cure paint criterion"
     Cyrus Aghanajafi
     DRYING TECHNOLOGY, pp.1405-1415, 2010
126. "design of optimum radiation shield for controlling and confining of radiations and prevention of rad"
     Cyrus Aghanajafi
     pp.73-75, 2010
127. "simulation of entrainment mass transfer in annular two phase flow using the physical concept"
     Cyrus Aghanajafi
     JOURNAL OF MECHANICS, pp.385-392, 2010
128. "analysis of dehumidification effect s on cooling capacity of an evaporative cooler"
     Cyrus Aghanajafi
     Journal of Thermal Science and Technology, pp.151-164, 2010
129. "designconstruction and simulation a multi purpose system for percision movement of control rods in n"
     Cyrus Aghanajafi
     ANNALS OF NUCLEAR ENERGY, pp.1659-1665, 2010
130. "influence of layer thickness on the design of rapid prototyped models"
     Cyrus Aghanajafi
     JOURNAL OF AIRCRAFT, pp.981-989, 2010
131. ""
     Cyrus Aghanajafi
     pp.28-39, 2010
132. ""
     Cyrus Aghanajafi
     pp.63-72, 2010
133. "INVESTIGATION OF CONVECTION AND RADIATION HEAT TRANSFER IN RHOMBUS MICROCHANNELS"
     Cyrus Aghanajafi
     pp.167-175, 2010
134. "integration of three dimentional printing technology for wind tunnel fabrication"
     Cyrus Aghanajafi
     JOURNAL OF AIRCRAFT, pp.2130-2142, 2010
135. "The effect of layer thickness on aerodynamic characteristics of wind tunnel RP models"
     Cyrus Aghanajafi
     AAPG BULLETIN, 2008
136. "Entropy analysis of a periadically oscillating flat plate"
     Cyrus Aghanajafi
     JOURNAL OF FUSION ENERGY, 2007
137. "Investigation of surface roughness on aerodynamics properties"
     Cyrus Aghanajafi
     JOURNAL OF AIRCRAFT, 2007
138. "Application of RP technology with polycarbonate material for wind tunnel model fabrication"
     Cyrus Aghanajafi
     2007
139. ""
     Cyrus Aghanajafi
     2007
140. "Investigation of Layer Thickness and Surface Roughness on Aerodynamic Coefficients of Wind Tunnel RP"
     Cyrus Aghanajafi
     2007
141. ""
     Cyrus Aghanajafi
     2007

Conference Paper

1. ""
   Cyrus Aghanajafi, Ardeshir Moftakhari
   طراحي بهينه اتاق مسكوني مجهز به بانل حرارتي با الگوريتم زنتيك,
2. ""
   Cyrus Aghanajafi
   حل معادله انتقال تشعشعي در يك محفظه دو بعدي با در نظر گرفتن رفتار طيفي محيط,
3. ""
   Cyrus Aghanajafi
   سيستم بازياب حرارت توسط سيكل الي رنكين جهت استفاده بهينه,
4. "1st conference on artificial intelligence and future technologies"
   Mostafa Zare, Cyrus Aghanajafi
   Enhancing the thermal performance prediction of solar assisted heat pumps with a two-stage data generation approach, 2023
5. "29th national and 7th international of Iranian conference biomedical engineering"
   Mahya Mohammadi, Mostafa Sefidgar, Farshad Moradikashkooli, Cyrus Aghanajafi, Majid Soltani
   Mathematical modeling of the effect of angiostatin on the density of the circular tumor induced microvascular network, 2022
6. "30th Annual International Conference of the Iranian Association of Mechanical Engineers"
   Mahya Mohammadi, Cyrus Aghanajafi, Majid Soltani
   Computational analysis of the effect of vascular normalization on lgG delivery into the solid tumor, 2022
7. "international conference on applied mathematics modeling and computational science (springer proceedings in mathematics and statistics)"
   Mahya Mohammadi, Cyrus Aghanajafi, Majid Soltani
   Numerical modeling of drug delivery in an isolated solid tumor under the influence of vascular normalization, 2021
8. "2nd conference on mechanical electrical and engineering science"
   A BAHERI, M NAJAFI, a azimi, Cyrus Aghanajafi
   يش بيني مصرف انرژي يك مجتمع مسكوني و كمينه كردن آن در اقليم سرد ايران, 2021
9. "2nd conference on mechanical electrical and engineering science"
   a baheri, m najafi, a azimi, Cyrus Aghanajafi
   تعيين تابع برازندگي و بهينه سازي مصرف انرژي يك مجتمع مسكوني در اقليم گرم و خشگ ايران, 2021
10. ""
    Neda Firooznia, Cyrus Aghanajafi
    بررسي اثر پارامترهاي مختلف جريان دو بعدي اطراف سيلندر ها مورد استفاده در اسكله شمع و عرشه, 2020
11. "vammcs international conference"
    Mahya Mohammadi, Cyrus Aghanajafi, Majid Soltani
    numerical modelling of drug delivery in an isolated solid tumor, 2019
12. "vammcs international conference"
    Mahya Mohammadi, Cyrus Aghanajafi, Majid Soltani
    investigation of the evolution of the microvascular network of a tumor under the inhibitory effect of endostatin, a mathematical study, 2019
13. "5th international conference on applied research in electrical, mechanical and mechatronics engineering"
    Reza Zandavi, Cyrus Aghanajafi
    بررسي عوامل موثر بر بازده اگزرژتيكي گردآورنده خورشيدي صفحه تخت, 2019
14. "5th international conference on applied research in electrical, mechanical and mechatronics engineering"
    Reza Zandavi, Cyrus Aghanajafi
    Investigation of Factors Affecting the Exergic Efficiency of Flat Plate Solar Collector, 2019
15. ""
    Hamidreza Jamshidi, Cyrus Aghanajafi
    آناليز جريان بين دو استوانه دوار با ويسكوزيته متغير حاوي نانوسيال AL2O3-Water از ديدگاه قانون دوم ترموديناميك, 2019
16. ""
    Hamidreza Jamshidi, Cyrus Aghanajafi
    محاسبات قابليت كاردهي در جريان با ضريب انتقال حرارت متغير با استفاده از نانوسيال COU-Water بين دو استوانه طويل دوار, 2019
17. ""
    Reza Zandavi, Cyrus Aghanajafi
    بررسي چگونگي افزايش بازده گردآورنده خورشيدي با موقعيت جغرافيايي معين, 2019
18. ""
    Hamidreza Jamshidi, Cyrus Aghanajafi
    بررسي محاسبات آنتروپي در جريان سيال بين دو استوانه متحدالمركز حاوي نانوذره معين با ضريب انتقال حرارت و ويسكوزيته تابع دما, 2019
19. "3rd International Conference on Mechanical and Aerospace Engineering"
    Fatemeh Shahabinejad, Cyrus Aghanajafi
    مقايسه حل يك بعدي دو بافت بيولوژيكي تحت شار حرارتي ليزر با تاخير فاز دوگانه به روش تفاضل محدود, 2018
20. "FEHMT 2018"
    Aidin Mohammadi, Cyrus Aghanajafi, Seyedeh zahra Mikaeeli
    Analysis of the second law of thermodynamics in helical tubes with laminar flow subjected to the costant wall temperature, 2018
21. "FEHMT 2018"
    Seyedeh zahra Mikaeeli, Cyrus Aghanajafi
    Optimization the parameters of a cgam cogeneration system using particle swarm algoithm, 2018
22. "FEHMT 2018"
    Majid Soltani, Cyrus Aghanajafi, morteza abdoli zadeh
    مدل سازي نوري گرمايي يك مدول متحرك دو محوره با حضور گرد و غبار بر سطح آن, 2018
23. "FEHMT 2018"
    Mahya Mohammadi, Cyrus Aghanajafi
    Numerical Prediction of time dependent temperature distribution inside a solar greenhouse, 2018
24. "FEHMT 2018"
    Aidin Mohammadi, Cyrus Aghanajafi
    numerical peridiction of time dependent temperature didtribution inside a solar green house, 2018
25. ""
    Amir Reza Razmi, Cyrus Aghanajafi
    تحليل ترموديناميكي سيستم تركيبي تبريد جذبي/ تراكمي حاصل از به كار گيري كمبرسور بين ژنراتور و كندانسور سيكل تبريد جذبي, 2017
26. ""
    Ehsan Ghaderi, Cyrus Aghanajafi
    تحليل ترموديناميكي سيكل رانكين نيروگاه خورشيدي با كلكتور هاي سهموي به صورت جزيي متخلخل شده, 2017
27. ""
    Cyrus Aghanajafi, Abolfazl Vares vazirian
    بررسي نرخ انتقال حرارت در كانال دندانه دار به روش لتيس بولتزمن, 2017
28. ""
    Cyrus Aghanajafi
    بررسي عملكرد بهينه دستگاه Micro CHP به منظور استفاده در منازل مسكوني, 2017
29. "4th National Conference and 2nd International Conference on Applied Research in Electrical Mechanical and Mechatronics Engineering"
    badrang boyyeh saman, hossein shokouhmand, Cyrus Aghanajafi, mohammad najafi
    optimization of double effect absorption chiller system with parabolic trough solar coolector by genetic alqorithm, 2017
30. "4th National Conference and 2nd International Conference on Applied Research in Electrical Mechanical and Mechatronics Engineering"
    badrang saman, hossein shokouhmand, Cyrus Aghanajafi, najafi mohammad
    بهينه سازي عملكرد چيلرهاي جذبي خورشيدي دو اثره با جمع كننده سهموي خطي به كمك الگوريتم ژنتيك, 2017
31. ""
    sadegh mojdahedi, Cyrus Aghanajafi
    چگونكي استفاده از قانون دوم ترموديناميك در بهينه سازي پمپ حرارتي زمين گرمايي توسط الگوريتم تكامل تفاضلي, 2016
32. ""
    alireza mojtahedi, Cyrus Aghanajafi
    تحليل اگزرژي ترمواكونوميك و بهينه سازي پمپ حرارتي زمين گرمايي با استفاده از الگوريتم كلوني زنبور عسل مصنوعي, 2016
33. ""
    sadeghe mojdahedi, Cyrus Aghanajafi
    مدل سازي ترمواكونوميك و بهينه سازي يك پمپ حرارتي زمين گرمايي در شرايط آب و هوايي تهران توسط الگوريتم ازدحام ذرات, 2016
34. "3rd National Conference on Recent Innovations in Industrial Engineering and Mechanical Engineering"
    azad hamzeh pour, hossein shokouhmand, Cyrus Aghanajafi, mohammad najafi
    Numerical investigation of heat transfer in utility boiler economizers with different fin spacing, 2016
35. "3rd National Conference on Recent Innovations in Industrial Engineering and Mechanical Engineering"
    azad hamzehpour, hossein shokouhmand , Cyrus Aghanajafi, mohammad najafi
    تحليل عددي انتقال حرارت در اكونومايزرهاي نيروگاهي با فواصل پره مختلف, 2016
36. ""
    azad hamzeh pour, Cyrus Aghanajafi, hossein shokouhmand, mohammad najafi
    برررسي عددي تاثير پره هاي دايروي اكونومايزرها و فاصله پره ها بر روي ميزان انتقال حرارت, 2016
37. "2nd International Conference and Exhibition on Solar Energy (ICESE-2015)"
    Ardeshir Moftakhari, Cyrus Aghanajafi,
    the use of solar radiative panels for heating residential buildings in different climates of iran, 2015
38. "The 6th International Conference on Heating Ventilating and Air Conditioning (ICHVAC-6)"
    Reza Keimanesh, Cyrus Aghanajafi
    خنك كاري صفحات عايق متخلخل از طريق انتقال حرارت تشعشعي جريان سيال ميكروقطبي, 2015
39. ""
    Ardeshir Moftakhari, Cyrus Aghanajafi
    شبيه سازي عددي بار حرارتي اتاق مسكوني بافن كويل با الگوريتم بهينه سازي ژنتيك, 2015
40. "ISME 2015"
    Reza Keimanesh, Cyrus Aghanajafi
    تاثيرات ضريب هدايت و لزجت وابسته به دما بر جريان و انتقال حرارت سيال ميكروقطبي, 2015
41. "Emerging Trends in Energy Conservation 4rd Conference (ETEC 2015)"
    Azadeh Shahidian, Behdad Farahmandi, Cyrus Aghanajafi
    محاسبه و بررسي بازيافت انرژي گازهاي خروجي از موتور احتراق داخلي با در نظر گرفتن ملاحظات اقتصادي, 2015
42. ""
    Ardeshir Moftakhari, Cyrus Aghanajafi
    آناليز حرارتي اتاق مسكوني با پانل تشعشعي با الگوريتم ژنتيك, 2015
43. ""
    Ardeshir Moftakhari, Cyrus Aghanajafi
    طراحي معكوس ضريب جابجايي گرمايي يك اتاق مسكوني با پانل تشعشعي, 2015
44. "2nd Conference on Heat and Mass Transfer (ICHMT)"
    Reza Keimanesh, Cyrus Aghanajafi
    انتقال حرارت سيال ميكروقطبي روي صفحه متخلخل با ضريب هدايت و لزجت وابسته به دما, 2014
45. "2nd Conference on Heat and Mass Transfer (ICHMT)"
    Arash Abjadpour, Cyrus Aghanajafi
    استفاده از ترفندهاي نواحي خاموش و مرز جاسازي شده جهت حل معادله انتقال تشعشعي در هندسه هاي پيچيده دو بعدي پيچيده, 2014
46. "2nd Conference on Heat and Mass Transfer (ICHMT)"
    Arash Abjadpour, Cyrus Aghanajafi
    حل عددي معادله انتقال تابشي با استفاده از روش جهات گسسته و شبكه بي سازمان براي هندسه هاي دو بعدي, 2014
47. "Advances in Engineering and Basic Sciences (AEBS)"
    Reza Keimanesh, Cyrus Aghanajafi
    بررسي تغييرات ضريب هدايت حرارتي در جريان سيال ميكروقطبي تحت اثر ميدان مغناطيسي روي صفحه الاستيك متخلخل, 2014
48. ""
    Reza Keimanesh, Cyrus Aghanajafi
    بررسي تغييرات لزجت در انتقال حرارت تشعشعي سيال ميكروقطبي روي صفحه الاستيك متخلخل تحت ميدان مغناطيسي, 2014
49. "2nd International Congress of Recent Advances in Engineering"
    Cyrus Aghanajafi
    بررسي اثر قطر جوش نقطه اي و ضخامت ورق روي حد تسليم نقطه ي اتصال دو ورق فولادي تحت بارگذاري استاتيكي, 2014
50. ""
    Arash Abjadpour, Cyrus Aghanajafi
    حل معادله انتقال تابشي در محفظه هاي چند بعدي با ميدان دماي مجهول به كمك روش جهات گسسته و مدل مجموع وزني گازهاي خاكستري, 2014
51. ""
    Cyrus Aghanajafi
    شبيه سازي عمليات حرارتي فولاد4130 با استفاده از نرم افزار ac3, 2014
52. ""
    Arash Abjadpour, Cyrus Aghanajafi
    حل معادله انتقال حرارت تشعشعي در هندسه هاي دو بعدي پيچيده در ناحيه مشاركتي با به كار گيري ترفندهاي نواحي خاموش و مرز جاسازي شده بر شبكه هاي كارتزين, 2014
53. "21st Annual International Conference on Mechanical Engineering"
    Cyrus Aghanajafi,
    finite difference solution for a transient radiation and conduction heat transfer in polymethylmethAcrilat PMMA, 2013
54. "21st Annual International Conference on Mechanical Engineering"
    Majied Amidpour, Cyrus Aghanajafi
    مدلسازي و تحليل انواع انتروبي توليدي و اگزرژي تلف شده در برج هاي تقطير با سيني هاي مشبك, 2013
55. "21st Annual International Conference on Mechanical Engineering"
    Arman Maroufi, Cyrus Aghanajafi, Hamed Mozaffari
    مدل سازي انتقال حرارت تشعشع و هدايت در فرايند انجماد به روش شبكه اي بولتزمن, 2013
56. "21st Annual International Conference on Mechanical Engineering"
    Majied Amidpour, Cyrus Aghanajafi
    مدل سازي و تحليل انواع آنتروپي توليدي و اگزرژي تلف شده در برج هاي تقطير با سيني هاي مشبك, 2013
57. "21st Annual International Conference on Mechanical Engineering"
    Cyrus Aghanajafi
    شبيه سازي گذرا و ارزيابي ترموديناميكي سيستم سرمايش جذب امونياكي خورشيدي متناسب با اقليم تهران, 2013
58. ""
    Cyrus Aghanajafi
    مقايسه عملكرد دو دسيكنت متداول در سيستم تهويه مطبوع و دسيكنت مايع خورشيدي متناسب با اقليم ايران, 2013
59. ""
    Cyrus Aghanajafi
    مقايسه عملكرد محلولهاي ابي ليتيم كلرايد و ليتيم برومايد در يك سيستم تهويه مطبوع دسيكنت مايع خورشيدي متناسب با اقليم ايران, 2013
60. "Systems Control Engineering and Biological Science Symposium"
    Cyrus Aghanajafi
    بررسي عملكرد ساق بند فوتبال در كاهش اسيبهاي ناشي از يك برخورد به روش الماني, 2012
61. ""
    Cyrus Aghanajafi
    طراحي و شبيه سازي چيلر جذبي خورشيدي متناسب با اقليم شهر تهران, 2012
62. ""
    Cyrus Aghanajafi
    محاسبه سرعت بهينه جوشكاري پلي كربنات براي توان بيشينه ليزر صنعتي گازكربنيك, 2012
63. ""
    Cyrus Aghanajafi
    Prediction of Operational Parameters in a CO2 Laser for Laser Cutting Using ANFIS, 2012
64. ""
    Cyrus Aghanajafi
    پيش بيني پارامترهاي كاربردي ليزر گاز كربنيك براي برشكاري ليزري به كمك سيستم فازي-عصبي تطبيقي, 2012
65. ""
    Cyrus Aghanajafi
    تاثير عمق و عدد رينولدز در جريان درون حفره مستطيلي به روش شبكهاي بولتزمن, 2012
66. ""
    Cyrus Aghanajafi
    مدلسازي جريان حول ستونهاي مربعي و مستطيلي با تركيب قرارگيري مختلف به روش شبكه بوتتزمن, 2012
67. ""
    Cyrus Aghanajafi
    تاثير عدد استفان بر روي انتقال حرارت مواد خالص در فرايندهاي تغير فاز, 2011
68. ""
    Cyrus Aghanajafi
    simuation of exergy analysis of solar lithium bromide single effect chiller, 2011
69. ""
    Cyrus Aghanajafi
    study of heat transfer in phase change materials and its application in cooling, 2011
70. ""
    Cyrus Aghanajafi
    شبيه سازي و بهينه سازي چيلر جذبي خورشيدي ليتيم برومايد, 2010
71. ""
    Cyrus Aghanajafi
    بهبود توان خروجي موتور احتراق داخلي در توليد براكنده توسط سيستم توربوكمبوند, 2010
72. ""
    Cyrus Aghanajafi
    ارائه يك مدل جامع جهت مدلسازي انتقال جرم قطره اي در جريان دو فاز با رژيم حلقوي, 2010
73. ""
    Cyrus Aghanajafi
    design of continous radiation paint cure ovens using the equivalent isentropic temperature/time, 2010
74. ""
    Cyrus Aghanajafi
    performance optimization of a two stage thermoelectric cooler, 2010
75. ""
    Cyrus Aghanajafi
    effects of smooth interface assumption on the accuracy of simulation of annular two phase flows, 2010
76. ""
    Cyrus Aghanajafi
    developing the proper form of objective function to be applied in gradient optim, 2010
77. ""
    Cyrus Aghanajafi
    a new approach for simulation of annulus two phase flow considering the four involved mass transfer, 2010
78. ""
    Cyrus Aghanajafi
    thermodynamics analysis of a combined power and water production system, 2010
79. ""
    azad hamzeh pour, hossein shokohmand, Cyrus Aghanajafi, mohammad najafi
    برسي عددي تاثير بره هاي اكنومايزر ها و فاصله بره ها بر روي ميزان انتقال حرارت, 2009
80. ""
    Cyrus Aghanajafi
    بررسي اثر عدد ناسلت بر توليد اب و انتروبي توليدي يك اب شيرين كن خورشيدي لولهاي, 2009
81. ""
    Arash Rezaei Gorjaei, Cyrus Aghanajafi
    بررسي عددي توليد انتروبي و انتقال حرارت جابجايي تركيبي با استفاده نانو سيال در يك انولو س مورب, 2009
82. "The 7th Conference of Iranian Aerospace Society"
    Cyrus Aghanajafi
    طراحي سيستم حركتي(بالابرنده و رانشي) يك هاور كرافت سبك دو منظوره بر مبناي استاندارد N A C A و BHSR, 2008
83. ""
    Cyrus Aghanajafi
    تجزيه تحليل مساله انتقال حرارت تابشي معكوس در يك شاتل فضايي, 2007
84. ""
    Cyrus Aghanajafi
    Experimental investigation into laser machining parameters on luminance of Gold, 2007
85. ""
    Cyrus Aghanajafi
    Investigations of the influence of cutting parameters on wire electrode wear in WEDM, 2007
86. ""
    Cyrus Aghanajafi
    Prediction of effective parameters of CO2 laser s power for laser cutting using artificial neural ne, 2007
87. ""
    Cyrus Aghanajafi
    Morphological studies and quantities evaluation on wire wear in wire electrical discharge machining, 2007
88. ""
    Cyrus Aghanajafi
    Investigations of the influence of several cutting parameters on wire electrode vibration in WEDM, 2007
89. ""
    Cyrus Aghanajafi
    Numerical modelig of thermal performance of helical coiled tube heat exchangers, 2007
90. ""
    Cyrus Aghanajafi
    Investigation of the water surface stability, 2007
91. ""
    Cyrus Aghanajafi
    Application of Technology with Carbonate Material, 2007
92. ""
    Cyrus Aghanajafi
    Air-to-Fuel Ratio Control of a Turbocharged Diesel Engine Equipped with EGR using Fuzzy Logic Contro, 2007
93. ""
    Cyrus Aghanajafi
    Investigation of layer thickness and Surface roughness on Aerodynamics coefficents of wind tunnel, 2007
94. ""
    Cyrus Aghanajafi
    numerical modeling of 2d solidification with imprcise interface with wavy temperature, 1991
95. ""
    Cyrus Aghanajafi
    analysis of pre cooling effect on dehumidification and improvement of an evaporative cooling, 1991
96. ""
    Cyrus Aghanajafi
    optimization of solar collector surface in desicant wheel cycle, 1991