سید مجید قریشی

مقالات علمی چاپ شده در مجلات

1. "An investigation on stability of laser hybrid arc welding"
   Majid Ghoreishi
   OPTICS AND LASERS IN ENGINEERING, pp.481-487,
2. ""
   Majid Ghoreishi
   pp.39-45,
3. "A dual response surface-desirability approach to processmodeling and optimization of Al2O3 powder-mi"
   Majid Ghoreishi
   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, pp.1459-1477,
4. ""
   Majid Ghoreishi
   Aerospace Mechanics, pp.1-12,
5. "Investigation of effective parameters on surface roughnessin thermomechanical tube spinning process"
   Majid Ghoreishi
   pp.261-270,
6. "Investigation into the effect of voltage excitation on EDM"
   Majid Ghoreishi
   MATERIALS AND MANUFACTURING PROCESSES,
7. "An Investigation into Laser Ablation of Copper"
   Majid Ghoreishi
   LASERS IN ENGINEERING, pp.151-162,
8. "Direct laser interference patterning-Assisted welding of IN625: melt-pool stabilisation, grain refinement, and tribological enhancement"
   Mojtaba Ghafari talei, Majid Ghoreishi
   CANADIAN METALLURGICAL QUARTERLY, pp.1-12, 2026
9. "Laser Marking on Acrylic Sheet, Statistical Modelling, and Optimization"
   M. Moradi, M. KARAMIMOGHADAM, s. MEIABADI, M. REZAYAT, G. CASALINO, j. MATHEW, A. Raj, S. joy, J. KRISHNA, D. KUMAR GOPAL, Majid Ghoreishi
   LASERS IN ENGINEERING, Vol. 60, pp.363-379, 2025
10. ""
    Mohammad Javad Afarid, Majid Ghoreishi, محمد حسين‌پورشرفشاده
    Vol. 72, pp.25-34, 2025
11. "Experimental Modeling and Process Optimization of Laser Transmission Welding with Fiber Optic Laser for Polymethyl Methacrylate in Zigzag Path"
    Milad Rahmanineia, Majid Ghoreishi
    Vol. 25, pp.271-278, 2025
12. "Optimization of drilling of AA7075 metal matrix composites using response surface method"
    Sepehr Aeinehbandi, Majid Ghoreishi, Amirreza Ghasemi jabal, Mohammad Mahdi Mehrafshan
    Vol. 11, pp.32-44, 2025
13. "Microstructure and mechanical properties of laser weld of selective laser melted IN625 superalloy"
    Mojtaba Ghafari talei, Majid Ghoreishi
    Journal of Materials Research and Technology-JMR and T, Vol. 36, pp.10157-10168, 2025
14. "A novel numerical modeling of microsecond laser beam percussion micro-drilling of Hastelloy X: experimental validation and multi-objective optimization"
    Milad Aghaee attar, Omid Razmkhah, Majid Ghoreishi, Mahmoud Moradi
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2024
15. "Statistical modeling and optimization of clad geometry in laser cladding of Amdry 961 on Inconel 713LC superalloy with response surface methodology"
    Mahya Hajiahmadi, Ali Khorram, Majid Ghoreishi
    JOURNAL OF LASER APPLICATIONS, Vol. 36, 2024
16. "Comparison of Arc and Pulse Welding on Properties of Inconel 617"
    Mohammadhasan Ahmadzadeh, Majid Ghoreishi
    Journal of Advanced Pharmacy Education and Research, Vol. 14, pp.1-6, 2024
17. "4D printing of shape memory polylactic acid beams: An experimental investigation into FDM additive manufacturing process parameters, mathematical modeling, and optimization"
    Mohammadhadi Hosseinzadeh, Majid Ghoreishi, Keivan Narooei
    Journal of Manufacturing Processes, Vol. 85, pp.774-782, 2023
18. "Simultaneous optimization of process parameters in hot forging of axisymmetric part of AA7075 by minimizing forming force and considering variation of stress distribution"
    Pejman Kiani, Majid Ghoreishi, Abdolhossien Jalali Aghchai
    Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 44, pp.1-15, 2022
19. "Experimental and Numerical Study on the Effect of 3D Printing Geometrical Parameters on the Torsional Shape Recovery Behavior of Polylactic Acid"
    Mohammadhadi Hosseinzadeh, Majid Ghoreishi, Keivan Narooei
    Aerospace Mechanics, Vol. 18, pp.167-179, 2022
20. ""
    Pejman Kiani, Majid Ghoreishi, Abdolhossien Jalali Aghchai
    Vol. 22, pp.1-23, 2022
21. ""
    Ehsan Tabibi, Majid Ghoreishi, Sajjad Beigmoradi Jabalbarezi
    Vol. 11, pp.111-122, 2021
22. "An investigation into the effect of thermal variables on the 3D printed shape memory polymer structures with different geometries"
    Mohammadhadi Hosseinzadeh, Majid Ghoreishi, Keivan Narooei
    JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, pp.1-12, 2021
23. "Prediction of residual stress and elasto-plastic strains distribution in disk keyhole laser welding of dissimilar joining between copper & 304 stainless steel"
    Milad Aghaee attar, Majid Ghoreishi
    Vol. 18, pp.1-18, 2021
24. "Experimental and Numerical Analysis on TIG Arc Welding of Stainless Steel Using RSM Approach"
    sasan sattarpanah Kargan roudi, Mahmoud Moradi, Milad Aghaee attar, Seyed Alireza Rasouli, Majid Ghoreishi, Jonathan Lawrence, Hussein Ibrahim
    Metals, Vol. 11, pp.1-19, 2021
25. "Experimental and finite element investigation of high-speed bone drilling: evaluation of force and temperature"
    Mohsen Sarparast, Majid Ghoreishi, Tohid Jahangirpoor, Vahid Tahmasbi
    Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 42, pp.1-9, 2020
26. ""
    Pejman Kiani, Majid Ghoreishi
    Vol. 90, pp.189-198, 2020
27. ""
    Babak Saghafi, Majid Ghoreishi, Keivan Narooei
    Iranian Journal of Mechanical Engineering Transactions of ISME, Vol. 23, pp.1-14, 2020
28. "Prediction of weld geometry, temperature contour and strain distribution in disk laser welding of dissimilar joining between copper & 304 stainless steel"
    Milad Aghaee Attar, Majid Ghoreishi, Z. Malekshahi Beiranvand
    OPTIK, Vol. 219, pp.1-10, 2020
29. "Prediction of safe zone for osteonecrosis in the cutting process of bovine cortical femur bone using Arbitrary Lagrangian-Eulerian method and multi-objective optimization"
    Babak Saghafi, Majid Ghoreishi, Keivan Narooei
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, pp.1-13, 2019
30. "Modelling and optimisation of temperature and force behaviour in high-speed bone drilling"
    Mohsen Sarparast, Majid Ghoreishi, Tohid Jahangirpoor, Vahid Tahmasbi
    BIOTECHNOLOGY and BIOTECHNOLOGICAL EQUIPMENT, Vol. 33, pp.1616-1625, 2019
31. ""
    Majid Ghoreishi, Mojtaba Zolfaghari, Vahid Tahmasbi, Hamed Heydari
    Vol. 18, pp.407-418, 2018
32. "Process and Outcome Comparison Between Laser Tungsten Inert Gas (TIG) and Laser-TIG Hybrid Welding"
    Mahmood Moradi, Majid Ghoreishi, Ali Khorram
    LASERS IN ENGINEERING, Vol. 39, pp.379-391, 2018
33. "Analytical and experimental study of effective parameters on process temperature during cortical bone drilling"
    Hamed Heydari, Navid Cheraghi Kazerooni, Mojtaba Zolfaghari, Majid Ghoreishi, Vahid Tahmasbi
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE, pp.1-13, 2018
34. "Experimental Modelling of NdYAG Laser Percussion Drilling Process of Ti6Al4V Alloy"
    Majid Ghoreishi, Omid Rohani Raftar
    Vol. 18, pp.688-696, 2018
35. "Optimum design of vibratory electrode in micro EDM process"
    Sajjad Beigmoradi Jabalbarezi, Majid Ghoreishi, Mehrdad Vahdati
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 95, pp.3731-3744, 2018
36. "Optimum design of vibratory electrode in micro-EDM process"
    Sajjad Beigmoradi Jabalbarezi, Majid Ghoreishi, Mehrdad Vahdati
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017
37. ""
    Vahid Tahmasbi, Majid Ghoreishi, Mojtaba Zolfaghari
    Vol. 47, pp.161-168, 2017
38. "Heat Source Modeling and Study on the Effect of Thickness on Residual Stress Distribution in Electron Beam Welding"
    , Majid Ghoreishi
    Journal of Welding and Joining, Vol. 35, pp.49-54, 2017
39. "Investigation and Optimization of EDM Milling and its Comparison with Die Sink EDM"
    Mahmood Moradi, , Majid Ghoreishi, H Abdollahi, M Rostami
    The International Journal of Advanced Design and Manufacturing Technology, Vol. 10, pp.33-42, 2017
40. "Thermo-mechanical analysis in pulsed laser cladding of WC powder on Inconel 718"
    Y. Javid, Majid Ghoreishi
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. -, pp.1-13, 2017
41. ""
    Jaber Maleki nejhad, Majid Ghoreishi, Ali Khorram
    Amirkabir Journal of Mechanical Engineering, Vol. 49, pp.423-431, 2017
42. "Sensitivity analysis of temperature and force in robotic bone drilling process using Sobol statistical method"
    , Majid Ghoreishi, Mojtaba Zolfaghari
    BIOTECHNOLOGY and BIOTECHNOLOGICAL EQUIPMENT, Vol. 32, pp.130-141, 2017
43. "Prediction of root mean square surface roughness in low discharge energy die-sinking EDM process considering the effect of successive discharge and plasma flushing efficiency"
    , Majid Ghoreishi
    Journal of Manufacturing Processes, Vol. 30, pp.502-515, 2017
44. "Investigation sensitivity analysis and multi-objective optimization of effective parameters on temperature and force in robotic drilling cortical bone"
    Vahid Tahmasbi, Majid Ghoreishi, Mojtaba Zolfaghari
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE, pp.1-17, 2017
45. ""
    Mohammad Nassajpor esfahani, Majid Ghoreishi
    Aerospace Mechanics, Vol. 13, pp.41-53, 2016
46. "Comparative study of expert predictive models based on adaptive neuro fuzzy inference system nonlinear autoregressive exogenous and Hammerstein-Wiener approaches for electrical discharge machining performance Material removal rate and surface roughness"
    Ehsan Roodgar Amoli, S. Salehinia, Majid Ghoreishi
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, Vol. -, pp.1-12, 2016
47. "Numerical and Experimental Study of Geometrical Dimensions on Laser-TIG Hybrid Welding of Stainless Steel 1.4418"
    mahmoud Moradi, Majid Ghoreishi, Azam Rahmani
    Journal of Modern Processes in Manufacturing and Production, Vol. 5, pp.21-31, 2016
48. "Temperature in Bone Drilling Process Mathematical Modeling and Optimization of Effective Parameters"
    Vahid Tahmasbi, Majid Ghoreishi,
    International Journal of Engineering, Vol. 29, 2016
49. "Investigation of hyperelastic models for nonlinear elastic behavior of demineralized and deproteinized bovine cortical femur bone"
    Mohammad hadi Hosseinzadeh, Majid Ghoreishi, Keivan Narooei
    Journal of the Mechanical Behavior of Biomedical Materials, Vol. 59, pp.393-403, 2016
50. ""
    , Majid Ghoreishi,
    Vol. 15, pp.98-106, 2015
51. "Comparative study on laser brazing and furnace brazing of Inconel 718 alloys with silver based filler metal"
    Ali Khorram, Majid Ghoreishi
    OPTICS AND LASER TECHNOLOGY, Vol. 68, pp.165-174, 2015
52. "Comparative study on laser brazing of austenitic and martensitic stainless steels with silver-based filler metal"
    Ali Khorram, Majid Ghoreishi, ,
    KOVOVE MATERIALY-METALLIC MATERIALS, Vol. 53, pp.1-8, 2015
53. "Numerical simulation of laser beam welding of Ti6Al4V sheet"
    Moein Azizpour, Majid Ghoreishi, Ali Khorram
    Journal of Computational and Applied Research in Mechanical Engineering - JCARME, Vol. 4, pp.145-154, 2015
54. ""
    Majid Ghoreishi, Vahid Tahmasbi
    Vol. 14, pp.113-121, 2015
55. "Mathematical modeling and optimization of the Electro-Discharge Machining (EDM) parameters on tungsten carbide composite Combining response surface methodology and desirability function technique"
    Saeed Assar Zadeh, Majid Ghoreishi
    Scientia Iranica, Vol. 22, pp.539-560, 2015
56. "Laser Assisted Brazing of Inconel 718 The Effects of Process Parameters and Subsequent Optimization"
    Ali Khorram, Majid Ghoreishi
    LASERS IN ENGINEERING, Vol. 31, pp.333-350, 2015
57. "The systematic parameter optimization in the Nd YAG laser beam welding of Inconel 625"
    , , , Majid Ghoreishi
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. -, pp.1-10, 2015
58. "Numerical and experimental study of flowing and spreading of silver-based filler metal droplet on different substrates during laser brazing process"
    Ali Khorram, Majid Ghoreishi
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. -, pp.1-17, 2015
59. "Modeling and multi objective optimization of effective parameters in drilling cortical bone"
    Vahid Tahmasbi, Majid Ghoreishi,
    Vol. 15, pp.109-115, 2015
60. "Sensitivity analysis of material removal rate in dry electro-discharge machining process"
    Vahid Tahmasbi, Majid Ghoreishi,
    Vol. 15, pp.393-397, 2015
61. "Laser Cladding of WC onto Inconel 718 Super Alloy Parametric Study and Physical Properties"
    , Majid Ghoreishi,
    LASERS IN ENGINEERING, pp.1-17, 2015
62. "Electro-thermal-based finite element simulation and experimental validation of material removal in static gap single-spark die-sinking electro-discharge machining process"
    Saeed Assar Zadeh, Majid Ghoreishi
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, pp.1-20, 2015
63. "Laser brazing of inconel 718 alloy with a silver based filler metal"
    Ali Khorram, Majid Ghoreishi, ,
    OPTICS AND LASER TECHNOLOGY, pp.443-450, 2014
64. "Parameter dependencies in laser hybrid arc welding by design of experiments and by a mass balance"
    , , Majid Ghoreishi, , , Jan Frostevarg, Torbjorn Ilar, Alexander F. H. Kaplan
    JOURNAL OF LASER APPLICATIONS, Vol. 26, 2014
65. "Finite-Volume Heat Transfer Model of the Nano Electrical Discharge Machining Process"
    , Majid Ghoreishi,
    Journal of Nanoelectronics and Optoelectronics, Vol. 9, pp.1-7, 2014
66. "Modelling and Optimization of Nd YAG Laser and Tungsten Inert Gas (TIG) Hybrid Welding of Stainless Steel"
    , Majid Ghoreishi,
    LASERS IN ENGINEERING, Vol. 27, pp.211-230, 2014
67. "An Investigation of Groove Depth and Thermal Stress Developed During the Pulsed Laser Grooving Process"
    , Majid Ghoreishi
    LASERS IN ENGINEERING, Vol. 26, pp.197-218, 2013
68. "Statistical Investigation into the Effects of Electro-Discharge Machining Parameters on WC/6 Co Composite-part 2 Parametric Analysis and Optimization through Disirability Function (DF)"
    , Majid Ghoreishi
    Advanced Materials Manufacturing Characterization, Vol. 3, pp.487-498, 2013
69. "Statistical Investigation into the Effects of Electro-Discharge Machining Parameters on WC/6 Co Composite-part 1 Modeling through Response Surface Methodology (RSM)"
    , Majid Ghoreishi
    Advanced Materials Manufacturing Characterization, Vol. 3, pp.478-486, 2013
70. "Statistical modeling and optimization of the EDM parameters on WC-6 Co composite through a hybride response surface methodology-desirability function approach"
    , Majid Ghoreishi
    International Journal of Engineering Science and Technology, Vol. 5, pp.1279-1302, 2013
71. "Thermo-mechanical Analysis of the Laser Welding of Stainless Steel 304"
    Majid Ghoreishi
    LASERS IN ENGINEERING, pp.69-84, 2012
72. "An Investigation on the effect of pulsed Nd YAG laser weldingparameters of stainless steel 1 4418"
    Majid Ghoreishi
    Advanced Materials Research, pp.6247-6251, 2012
73. ""
    Majid Ghoreishi
    Aerospace Mechanics, pp.1-9, 2012
74. "CO2 Laser Welding of a Ti6Al4V Alloy and the Effects of Laser Parameters"
    Majid Ghoreishi
    LASERS IN ENGINEERING, pp.135-148, 2011
75. "Statistical analysis of dimensional changes in thermomechanical tube spinning process"
    Majid Ghoreishi
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, pp.597-607, 2011
76. "The effect of power density scanning velocity and pulse frequency on residual stress in laser groo"
    Majid Ghoreishi
    MANUFACTURING ENGINEERING, pp.1772-1783, 2011
77. "Influences of laser welding parameters on the geometricprofile of NI-base superalloy Rene 80 weld-be"
    Majid Ghoreishi
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, pp.205-215, 2011
78. "Optimization of Bead Geometry in CO2 Laser Welding ofTi 6Al 4V Using Response Surface Methodology"
    Majid Ghoreishi
    pp.708-712, 2011
79. "COMPUTATIONAL FLUID DYNAMIC SIMULATION OF THE NANOELECTRICAL DISCHARGE MACHINING PROCESS"
    Majid Ghoreishi
    MANUFACTURING ENGINEERING, pp.561-568, 2011
80. "A Three-Dimensional Heat Transfer Simulation of Laser Full Penetration Welding of Rene-80 Super"
    Majid Ghoreishi
    LASERS IN ENGINEERING, pp.1-11, 2011
81. ""
    Majid Ghoreishi
    pp.23-29, 2010
82. ""
    Majid Ghoreishi
    Amirkabir Journal of Mechanical Engineering, pp.63-71, 2010
83. "Using ann approach to investigate the welds geometry of Ti 6Al 4v titanium alloy"
    Majid Ghoreishi
    AAPG BULLETIN, pp.488-495, 2010
84. "Modeling and Investigation of the Wall Thickness Changes and Process Time in Thermo-Mechanical Tube"
    Majid Ghoreishi
    pp.141-148, 2010
85. ""
    Majid Ghoreishi
    Aerospace Mechanics, pp.1-15, 2009
86. "optimisation of effectiv"
    Majid Ghoreishi
    AAPG BULLETIN, 2008
87. "Neural-network-based modeling and optimization of the electro-discharge machining process"
    Majid Ghoreishi
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, pp.488-500, 2008

مقالات علمی ارائه شده در همایش‌ها

1. ""
   Majid Ghoreishi
   ارزيابي تاريخچه دمايي در فرآيند جوشكاري تركيبي ليزر تيگ,
2. "ICME 2025"
   Sepehr Aeinehbandi, Mohammad Amin Koukha, Majid Ghoreishi, Mohammad Mahdi Mehrafshan, Amirreza Ghasemi jabal
   شبيه سازي و بررسي تجربي و بهينه سازي سوراخكاري استخوان كورتيكال با سيم كرشنر, 2025
3. ""
   Sepehr Aeinehbandi, Majid Ghoreishi, Amirreza Ghasemi jabal, Mohammad Mahdi Mehrafshan
   بهينه سازي سوراخكاري كامپوزيت هاي زمينه فلزي AA7075 با استفاده از روش سطح پاسخ, 2024
4. "ICME 2022"
   Pejman Kiani, Majid Ghoreishi, Abdolhossien Jalali Aghchai
   بهينه سازي چند منظوره و شبيه سازي فورج داغ قطعه ديسكي آلياژ آلومينيوم AA7075-T6, 2022
5. "ICME 2022"
   Majid Ghoreishi
   ضرورت آموزش روش طراحي آزمايشها به دانشجويان تحصيلات تكميلي و نقدي بر استفاده هاي نابجا از اين روش, 2022
6. "2nd International Conference on Mechanical Metallurgy and Mining"
   Mojaba Rahimi Bidgoli, Majid Ghoreishi, mahmood moradi, alireza rasouli
   بررسي چگالي شار مغناطيسي اطراف آهنرباي دايم به منظور انجام فرآيند جوشكاري ليزر در حضور ميدان مغناطيسي, 2021
7. ""
   Nemat Hamedi, Majid Ghoreishi
   بررسي پارامترهاي موثر بر سلامت سطح آلياژ Ti-6Al-4V در فرآيند ماشينكاري تخليه الكتريكي, 2021
8. "27th Annual International conference of Iranian society mechanical engineering"
   Seyed Jalal Naserosaadati, Majid Ghoreishi, youness javid, Mojtaba Shirzadi
   بررسي و مدلسازي ميزان رقيق شدن در فرآيند روكش كاري ليزري, 2019
9. "27th Annual International conference of Iranian society mechanical engineering"
   Iman Saberi, Majid Ghoreishi, Mohammad Khosroabadi
   بررسي زبري سطح آلياژ تنگستن كاربايد در عمليات ماشين كاري تخليه الكتريكي همراه با ميدان مغناطيسي چرخان, 2019
10. "3rd International Conference on Mechanical and Aerospace Engineering"
    Babak Saghafi, Majid Ghoreishi, Keivan Narooei
    بررسي مرگ سلولي استخوان در برشكاري متعامد با استفاده از روش اويلر لاگرانژ دلخواه و كوپل حرارتي- جابجايي, 2018
11. "26th Annual International Conference of Iranian Society of Mechanical Engineering"
    Babak Saghafi, Majid Ghoreishi, Keivan Narooei
    مدلسازي برشكاري متعامد استخوان ران پا با روش لاگرانژي اويلري دلخواه, 2018
12. "26th Annual International Conference of Iranian Society of Mechanical Engineering"
    Majid Ghoreishi, Omid Rohani Raftar
    بررسي اثر متغيرهاي سوراخكاري ضربه اي با پرتو ليزر بر مشخصات هندسي سوراخ ها, 2018
13. "1st Iran Congress on Industrial Applications of Advanced Materials and Manufacturing"
    Majid Ghoreishi, Mehrdad Vahdati, Sajjad Beigmoradi Jabalbarezi, Abdollah Tavakoli
    Effect of the Tool Electrode Geometry on Material Removal Rate in Micro- EDM Process, 2017
14. "25th Annual International Conference on Mechanical Engineering (ISME2017)"
    Pejman Kiani, Majid Ghoreishi, amjad sazgar
    بررسي و بهينه سازي اثر متغيرهاي جوشكاري ليزري فولادهاي زنگ نزن آستنيتي 304 و 316 بر عدد فريت, 2017
15. ""
    omid mehrabi, mahmoud moradi, taher azdast, Majid Ghoreishi
    بررسي تاثير فشار گاز بر كيفيت ظاهري شيار برش برش ليزري پلي كربنات, 2016
16. "24th Annual International Conference on Mechanical Engineering (ISME2016)"
    Mohammad Nassajpor esfahani, Majid Ghoreishi
    اثرات خنك كاري برودتي با نيتروژن مايع در بهبود فرآيند سنگ زني آلياژ تيتانيوم (Ti-6A1-4V), 2016
17. "3rd National and 1st International Conference on Applied Researches in Electrical Mechanical and Mechantronics Engineering"
    Mohammad hadi Hosseinzadeh, Majid Ghoreishi, Keivan Narooei
    ارائه مدل هايپر الاستيك مناسب براي استخوان دمينرال و بررسي آن به كمك شبيه سازي اجزاي محدود, 2016
18. "ISME 2015"
    Majid Ghoreishi
    تحليل پايداري جوشكاري تركيبي ليزر قوس با استفاده از طراحي آزمايش ها و تصوير برداري سرعت بالا, 2015
19. "Non-Ferrous Metals and Alloys (new applied materials and technologies)"
    Majid Ghoreishi,
    مطالعه ي تجربي اثر پارامترهاي جوشكاري ليزر بر استحكام كششي سوپر آلياژ اينكونل 625, 2013
20. "21st Annual International Conference on Mechanical Engineering"
    Majid Ghoreishi
    مدل سازي فرآيند ماشين كاري تخليه الكتريكي در حالت تك جرقه به روش اجزاي محدود, 2013
21. "21st Annual International Conference on Mechanical Engineering"
    Majid Ghoreishi,
    مدل تحليلي توزيع حرارت در جوشكاري تركيبي ليزر- تيگ با استفاده از تابع گرين, 2013
22. "21st Annual International Conference on Mechanical Engineering"
    Ehsan Roodgar Amoli, Majid Ghoreishi
    مدلسازي عملكرد ماشينكاري تخليه الكتريكي خشك مبتني بر سيستم استنتاج فازي عصبي تطبيقي, 2013
23. ""
    Majid Ghoreishi
    بررسي پارامترهاي ماشينكاري الكتروشيميايي آلياژ نايتينول به روش رويه پاسخ, 2012
24. ""
    Majid Ghoreishi
    مدلسازي سه بعدي توزيعحرارت حوضچه جوش در فرآيند جوشكاري تركيبي ليزر تيگ, 2012
25. ""
    Majid Ghoreishi
    مدل سازي منبع حرارتي و بررسي تاثير ضخامت در توزيع تنش پسماند در فرآيندجوشكاري پرتو الكتروني, 2011
26. ""
    Majid Ghoreishi
    بهينه سازي فرآيند توليد فوم سخت با استفاده از روش طراحي آزمايشها, 2011
27. ""
    Majid Ghoreishi
    ماشين كاري هاي تخليه الكتريكي خشك و نيمه خشك, 2011
28. ""
    Majid Ghoreishi
    بررسي و بهينه سازي پارامترهاي موثر در ماشينكاري تخليه الكتريكي آلومينيوم آلياژي7075, 2011
29. ""
    Majid Ghoreishi
    Investigation the effect of solid state Nd YAG laser welding parameters of stainless steel 1 4418, 2011
30. ""
    Majid Ghoreishi
    Statistical modeling and optimization of process parameters inelectro-discharge machining of cobalt, 2011
31. ""
    Majid Ghoreishi
    مدلسازي حرارتي قطعه كار در فرآيند Nano-EDM, 2010
32. ""
    Majid Ghoreishi
    بررسي و بهينه سازي فرزكاري تخليه الكتريكي و مقايسه آن با ماشينكاري تخليه الكتريكي غوطهوري بر روي فول, 2010
33. ""
    Majid Ghoreishi
    بررسي توزيع تنشهاي پسماند در جوشكاري ليزر به كمك روش اجزاي محدود, 2010
34. ""
    Majid Ghoreishi
    شبيه سازي نانوحفره حاصل از فرآيندNano-EDMبر روي قطعه كار, 2010
35. ""
    Majid Ghoreishi
    Laser welding process optimization using statistical design of experiments, 2010
36. ""
    Majid Ghoreishi
    Response surface methodology approach to process modeling and optimization of powder mixed electrica, 2010
37. ""
    Majid Ghoreishi
    بررسي تاثير عمليات حرارتي فوق پيرسختي بر ساختارسوپرآلياژ پايه نيكل 80Rene, 2010
38. ""
    Majid Ghoreishi
    تحليل عوامل موثر در جوشكاري ليزر توسط روش آماري رويه پاسخ, 2010
39. ""
    Majid Ghoreishi
    شبيه سازي فرآيند ماشينكاري تخليه الكتريكي با استفاده از روش اجزا محدود, 2010
40. ""
    Majid Ghoreishi
    تنش هاي حرارتي و پسماند ايجاد شده در ماشين كاري تخليه الكتريكي, 2010
41. ""
    Majid Ghoreishi
    شبيه سازي انتقال حرارت سه بعدي در جوشكاري ليزر, 2010
42. ""
    Majid Ghoreishi
    A Coupled Artificial Neural Network-Genetic Algorithm (ANN-GA) Based, 2010
43. ""
    Majid Ghoreishi
    شبيه سازي ماشينكاري تبخيري با ليزر به كمك روش المان محدود, 2009
44. ""
    Majid Ghoreishi
    Statistical modelling of supper alloy Rene80 Laser welding, 2009
45. ""
    Majid Ghoreishi
    بررسي اثر ماشين كاري تخليه الكتريكي بر آلياژ حافظه دار نايتينول, 2009
46. ""
    Majid Ghoreishi
    بررسي تاثير پارامترهاي ماشينكاري سيم برش بر زبري سطح و نرخ براده برداري تركيب بين فلزي گاما آلوميناي, 2009
47. ""
    Majid Ghoreishi
    بررسي تئوريك و روابط حاكم بر مبدل پيزو الكتريك در فرآيند شستشو مافوق صوت, 2008
48. ""
    Majid Ghoreishi
    مدلسازي كيفيت سطح در فرآيند ترمو مكانيكي شكل دهي چرخشي لوله بكمك روش طراحي آزمايشات, 2008
49. ""
    Majid Ghoreishi
    Physical models for Blade Machining by Electro Discharge Machining, 2008
50. ""
    Majid Ghoreishi
    تاثير پارامترهاي جوشكاري ليزر سوپر آلياژ پايه نيكلRene 80, 2008
51. ""
    Majid Ghoreishi
    بررسي پارامترهاي موثر بر جوشكاري ليزر سوپر آلياژها, 2008
52. ""
    Majid Ghoreishi
    مدلسازي تغييرات ضخامت جداره لوله در فرآيند شكل دهي چرخشي لوله, 2008
53. "The 7th Conference of Iranian Aerospace Society"
    Majid Ghoreishi
    بررسي پارزامترهاي موثر بر رشد قطري در فرآيند شكل دهي چرخشي لوله, 2008
54. ""
    Majid Ghoreishi
    مقايسيه سيگنالهاي مرجع متفاوت در پردازش نتايج آزمونهاي فراصوتي, 2007
55. ""
    Majid Ghoreishi
    Investigation on effective parameters on tube spinning process, 2007
56. ""
    Majid Ghoreishi
    The smoothing simulation in the ECM, 2007
57. ""
    Majid Ghoreishi
    The electrical discharge machining characteristics of TiNi, 2007
58. ""
    Majid Ghoreishi
    Modelling and optimizing powder mixed EDM, 2007
59. ""
    Majid Ghoreishi
    Determination of equipotential lines in ECM by FEM, 2007
60. ""
    Majid Ghoreishi
    A neural network approach for powder mixed EDM, 2007
61. ""
    Majid Ghoreishi
    simulation of electrochemical machining process and tool design, 2007
62. ""
    Majid Ghoreishi
    Heat transfer and electro static force modelling in EDM, 2007
63. ""
    Majid Ghoreishi
    optimization of die angle and processing parameters in extrusion process, 2007
64. ""
    Majid Ghoreishi
    A general model of material removal and surface roughness for short pulses and long pulses in EDM, 2007